Flatmaster Positive Input Ventilation System

By: X-air  06-Dec-2011
Keywords: Filters, Hay Fever, Power Consumption

Flatmaster – low cost, low energy positive input ventilation unit for use in homes without a loft.

Features & Benefits

  • Extremely low power consumption – as little as 4.6 watts.
  • Very low maintenance requirement (filter clean every 1-2 years).
  • Interchangeable, multi-positional, circular and rectangular inlet/outlet spigots for improved aesthetics and simpler installation.
  • Whisper quiet operation.
  • Significantly improves indoor air quality.
  • 3 year parts and labour warranty.

Lower cost derivatives of Flatmaster 2000

The Flatmaster operates in a similar way to the Flatmaster 2000 unit, but does not incorporate the heater or airflow boost facility.

Suitable for other applications

The Flatmaster unit can also be used to provide ventilation to basements, cellars, garages and other areas that would benefit from a continuous supply of fresh, filtered air.

Redistributes heat from ceiling level

Input air is directed across the ceiling (usually in your hallway). This uses a scientific principle called the Coanda effect, which has the impact of mixing with the wasted warmer air that has risen above head height in your home. It therefore increases the efficiency of your heating system.

Very low power consumption

Flatmaster uses as little as 5 watts of power.

Highly effective filters

G3 grade, which means that they are so fine they will exclude pollen (great for hay fever sufferers) as well as the dust and grime of outside pollutants. Filters are very simply replaced/washed every 1-2 years.

Whisper quiet operation

Flatmaster uses a large fan running slowly. In this way any noise generated is minimal. For most of the time it is unlikely that you will be aware that your Flatmaster is operating other than a fresher feeling in your hallway caused by the movement of the incoming air.

Keywords: Filters, Hay Fever, Power Consumption, Ventilation Unit

Other products and services from X-air

06-Dec-2011

Drimaster 2000 Positive Input Ventilation System

This sensor continuously monitors the temperature in the loft and house, boosting the air volume when the loft temperature is greater than the house (heat recovery mode). Essentially the concept is to introduce fresh, filtered air into the dwelling at a continuous rate, encouraging movement of air from inside to outside.


06-Dec-2011

Drimaster 365 Positive Input Ventilation System

This is particularly advantageous in warm weather, when a conventional unit would have switched itself off because of a high loft temperature, and especially on those warm summer nights. Unlike conventional positive input ventilation units which only draw air from the loft, Drimaster 365 can also draw in air directly from outside.


06-Dec-2011

Flatmaster 2000 Positive Input Ventilation System

For most of the time it is unlikely that you will be aware that your Flatmaster is operating other than a fresher feeling in your hallway caused by the movement of the incoming air. Interchangeable, multi-positional, circular and rectangular inlet/outlet spigots for improved aesthetics and simpler installation. Filters are very simply replaced/washed every 1-2 years. Extremely low power consumption – as little as 8 watts.