The Shade Experts Offer Top Quality Italian Offset Patio Umbrellas Worldwide

By: The ShadeExperts  06-Dec-2011
Keywords: Steel Construction, Engineering Department, Patio Umbrellas

All of our

, center post and

are made in Italy and we keep stock here in the US, shipping is FOB Wellington/West Palm Beach, Florida, USA. All stock merchandise ships in 3-5 days to all parts of the US. Special orders like specific colors are always available and there are no minimums, please allow 30-45 days.

It will be our pleasure to provide you with full details regarding Parola umbrellas, the first choice of excellence in shade products that blend the practical and the elegant. 

Our exclusively “Poker Offset Umbrella” is one of our large offset umbrellas and the most unique cantilever umbrella. It consists of four without the nuisance of having multiple center post umbrellas. One central pole maximizes your usable covered shade umbrella area. Available in 20x20ft or 26x26ft which gives you 400 to 676 square feet of usable area for additional table space or shade umbrella area. The entire structure can be easily taken down for storage during the off-season. Heavy duty steel construction and all replaceable parts provide incomparable durability. Order extra canopies to easily change the look and color scheme of your , or country club. Without the encumbrance of having multiple side post umbrellas or . Available with optional rain gutters for useable outdoor space even as a rain umbrella as well as a shade umbrella. The entire structure is constructed from epoxy powder coated steel with an anti rust process applied. This entire structure is handmade in Italy by artisans with extreme attention to detail. The canopy is constructed of Corti fabric, the European equivalent to Sunbrella. This solution-dyed, 100% acrylic fabric is breathable and goes through an anti-mold treatment and is fade resistant, water, oil, and dirt repelling. Vents in the canopy and wind bars provide air passage to allow for more stability in heavier winds. This umbrella features all replaceable parts, which makes this an umbrella to last.

Available as on option is a permanent mounted base.

Shown in the figure on the right is a base made in steel used for an installation of a Double Side post Umbrella. All permanent installations are different and we suggest checking with your engineering department or local building department for specific requirements and permits. Dimensions and sizes will vary based on where and how the base is installed (eg. surface mounted plate or dug into the ground).

The Double Offset Umbrella, is our latest innovation, providing double the shade with a single post, thus maximizing your shade and furniture placement. The Double side post is ideal for long narrow spaces. Available in 10x20’ or 13x26’ and providing 200 to 338 square feet of shaded area. Heavy duty steel construction with replaceable parts provides incomparable durability. Comes in brown/copper but can be custom ordered in ivory, green, black or many other different colors.

The Stromboli is a perfect choice for those who want durability but prefer the aesthetic beauty of wood. Made from both steel and mahogany, it is both practical and elegant. All replaceable parts make this an umbrella to last a lifetime. 

The Vulcano offset umbrella is the ideal choice for those who want durability without renouncing quality. With the side arm and post made entirely of powder-epoxy coated steel, it is ideal for more rugged conditions. The heavy duty steel construction comes in brown/copper or can be special ordered in ivory, black, green, grey or a variety of different colors.

The Prestige center post umbrella is both elegant and robust. Built to last with all parts interchangeable.
The Prestige center post umbrella features a large one piece mahogany pole, making this a durable commercial wood center post. Available in sizes up to 13x16' for maximum shaded area. The beauty and the look of wood with ultimate strength.
This is one of our larger commercial grade aluminum center post umbrellas. Used for large patios and commercial applications, such as restaurant, hotel, or country club settings.
The Prestige center post umbrella is both elegant and robust. Built to last with all parts interchangeable
The Prestige Aluminum Umbrella the choice for those who want durability and elegance. The all aluminum handmade construction provides the ultimate strength. Available in sizes up to 13x16' maximizing your shaded area.

The Itaca center post umbrella features a one piece mahogany pole, making this a durable wood center post. The large diameter of the central pole also makes this the ideal commercial wood umbrella. The beauty and the look of wood with ultimate strength.
Careful attention to detail, choice of materials, and the handmade craftsmanship makes the Itaca a high quality durable center post umbrella. Built to last with all parts interchangeable.
This is one of our larger commercial grade wooden center post umbrellas. Used for large patios and commercial applications, such as restaurant, hotel, or country club settings.

The Shade Experts GIANT UMBRELLAS – You get what you paid for!
Giant Commercial Umbrellas, Patio Umbrellas, Market Umbrellas

Our and our are manufactured with the highest grade materials in three shapes, and over 90 standard sizes. Adjacent square or rectangular umbrellas can be linked with rain gutters to cover extremely large areas. Our “Strong Wind” umbrellas are strongest on the market.
We use two types of material in 46 colors in our creative canopy designs, and offer a selection of 9 colors to powder-coat the mast. Optional accessories include side panels, infrared heating and lighting and screen-printing your logo on roof panels or valances. Two types of permanent installation and a selection of portable bases assure easy and safe operation.
The have been made in Germany for over twenty years. Their superb design, expert engineering and German precision in manufacturing made them the choice of European customers who demand top quality, reliability, strength, safety and value.
We provide stylish protection from the elements to a wide range of customers from exclusive hotels, restaurants, resorts, country clubs and private residences to municipalities, cafes, pubs, breweries and even fast food restaurant chains.

Frame 
• Powder coated aluminum profiles that resists peeling, chipping, rusting and oxidation, therefore remain maintenance free and permanently appealing.
• All of the Type T, TL/TLx and Tx are manufactured with 8, 10 or 12 exceptionally strong roof supporting arms. The longer roofing arms are reinforced inside for increased rigidity.
• All joints are manufactured from high grade steel.
• All reinforcing arms are individually replaceable.
• Each support ring is welded to the main flange. The bottom supporting disk is welded to the main pole.
• The telescopic part is high density plastic bearing, and guided to prevent rotation or twisting.
• Through the use of adjustable main arms, it is possible to alter the tension of the roof covering material and to remove it easily from the frame.
• When the umbrella is lowered the canopy can't get cut between the arms.
Mechanics
• The telescopic design, with cranked lever operation, is exceptionally strong to ensure high wind stability and durability.
• Even the largest center post and market umbrellas are easily operated.
• A maintenance free gear box (built into the mast) rotates the special spindle lift which is moving the telescoping part.
• For the Type TL/TLx models the slider is connected to the telescope with 2 stainless steel wires. The telescope and the slider are moving together, enabling the very easy operation of the umbrella.
• The telescopic system is designed with a special spindle lift, so even the largest patio umbrella folds up above the table without disturbing its content.
Drive
• The drive crank handle locks the spindles automatically in every opening/closing position, to prevent accidental opening or closing of the giant umbrella, - an important safety consideration.
• The cranking handle is removable for safety and esthetic reasons.

Large patio umbrellas Type T Large center post Umbrella

• Powder coated aluminum profiles that resists peeling, chipping, rusting and oxidation, therefore remain maintenance free and permanently appealing.
• The Type T giant umbrellas are manufactured with 8 exceptionally strong roof supporting arms. The longer roofing arms are reinforced inside for increased rigidity.
• All joints are manufactured from high grade steel.
• All reinforcing arms are individually replaceable.
• Through the use of adjustable main arms, it is possible to alter the tension of the roof covering material and to remove it easily from the frame.
• Each supporting arm is welded to the main flange. The bottom supporting disk is welded to the main pole.
• The telescopic part is high density plastic bearing, and guided to
prevent rotation or twisting. 
• The telescopic giant umbrella design, with cranked lever operation, is exceptionally strong that ensures high wind stability and durability.
• A maintenance free gear box (built into the mast) rotates the special spindle lift which is moving the telescoping part.
• The telescopic umbrella system is designed with a special spindle lift, so even the largest umbrella folds up above the tables without disturbing their contents, or the guests sitting around the table; a very important feature in the hospitality industry.
• Even the largest patio market umbrellas are easily operated.
• The drive crank handle locks the spindles automatically in every opening/closing position, to prevent accidental opening or closing of the giant umbrella.
• The cranking handle is removable.

Giant patio umbrellas Type TL and TLx Giant Umbrellas

• Powder coated aluminum profiles that resists peeling, chipping, rusting and oxidation, therefore remain maintenance free and permanently appealing.
• The TL and TLx giant umbrellas are manufactured exclusively with 10 or 12 very strong roof supporting arms or ribs to which the covering material is fitted.
• All roofing arms are reinforced inside for increased rigidity.
• All joints are manufactured from high grade steel.
• All reinforcing arms are individually replaceable.
• Through the use of adjustable joints it is possible to alter the tension of the roof covering material and to remove it easily from the frame.
• The telescopic part moves on high density plastic bearing and guided to prevent rotation or twisting.
• The Hillman telescopic giant umbrella design, with cranked lever operation, is exceptionally strong and that ensures high wind stability and durability.
• Each roof arm is mounted individually to a plate that is welded to the telescopic umbrella.
• The supporting arms are individually bolted to the slider plate.
• A maintenance free gear box (built into the mast) rotates the special spindle lift which is moving the telescopic umbrella part.
• The slider is connected to the telescope with 2 stainless steel wires. The telescopic umbrella and the slider are moving together, enabling the very easy operation of the umbrella.
• The drive crank handle locks the spindles automatically in every opening/closing position, to prevent accidental opening or closing of the giant umbrella.

Giant patio umbrellas Type Tx “Strong Wind” Large patio umbrellas

• Type Tx Strong Wind Giant Umbrellas are currently available in limited sizes and shapes. Only their dimensions and their strength are different, the frame, mechanical and drive characteristics are the same for both Strong Wind umbrellas. 
• Strong Wind umbrellas are available with mast mounted lights and energy saving shock-resistant infrared heating.
• Powder coated aluminum profiles that resists peeling, chipping, rusting and oxidation, therefore remain maintenance free and permanently appealing.
• Depending on their size, the Tx Strong Wind umbrellas are manufactured with 8 or 12 very strong roof supporting arms to which the covering material is fitted.
• All roofing arms are reinforced inside for increased rigidity.
• All joints are manufactured from high grade steel.
• All reinforcing arms are individually replaceable.
• Through the use of adjustable joints it is possible to alter the tension of the roof covering material and to remove it easily from the frame.
• The telescopic part moves on high density plastic bearing and guided to prevent rotation or twisting.
• The telescopic giant patio umbrella design, with cranked lever operation, is exceptionally strong that ensures high wind stability and durability.
• Each roof arm is mounted individually to a plate that is welded to the telescopic umbrella.
• The supporting arms are individually bolted to the slider plate.
• A maintenance free gear box (built into the mast) rotates the special spindle lift which is moving the telescopic umbrella part.
• The slider is connected to the telescope with 2 stainless steel wires. The telescope and the slider are moving together, enabling very easy operation of the umbrella.

• The drive crank handle locks the spindles automatically in every opening/closing position to prevent accidental
opening or closing of the giant patio umbrella.

Keywords: Engineering Department, Heavy Duty Steel, Local Building Department, Patio Umbrellas, Shade Umbrella, Side Post Umbrellas, Steel Construction,

Other products and services from The ShadeExperts

06-Dec-2011

The Shade Experts Offering Top Quality Italian Offset Patio Umbrellas Worldwide - product

The heavy duty steel construction of this offset umbrella comes in brown/copper or can be special ordered in ivory, black, green, grey or a variety of different colors. With the side arm and post made entirely of powder-epoxy coated steel, it is ideal for more rugged conditions. The ideal choice for those who want durability without renouncing quality.