Continental Fire Protection Ltd » Intumescent Strip - intumescent fire seals

By: Continental Fire Protection  06-Dec-2011
Keywords: Building Control, Intumescent, Intumescent Fire

Intumescent Strip - Fire Only

Astrostrip FO - fire only seals. Intumescent seals for use where no smoke sealing is required.

  • CERTIFIRE Approval
  • Passed at BS476 Part 22 & 31.1
  • 30 or 60 minute rated types
  • LANTAC Building Control Approval
  • NHBC Type Approval
  • Available in 12 Colours

All seals available in a pre-pack containing 2×2.1M and 1×1.05m lengths complete with fitting instructions.

All seals are supplied with self-adhesive backing tape.

Alernative Smoke Seal fittings: Grey 6mm Nylon pile to Black or White. Longer length - Grey Nylon pile.

Standard: 6mm to 7mm, 8mm, 9mm, 10mm, 11mm.

Alternative seals: Neoprene rubber draft seals in black, single blade, twin blade or bubble seal.

Description

Intumescent fire and smoke seals for fire door assemblies. An ASTRO intumescent graphite based fireseal contained within a PVC sleeve fitted into a rebate to either the leaves or the frame will in the event of a fire expand (intumesce) to many times its original volume and seal the gap around the door to provide a safe and effective barrier against the passage of fire, smoke and hot gases.

Astroflame Intumescent Fireseals are available with or without a cold smoke seal in the form of a nylon pile. Astroflame smokeseals provide a permanent barrier to smoke, acoustic and thermal applications and are particularly important as smoke travels faster and further than fire itself.

All ASTRO seals are supplied with a self-adhesive backing tape as standard to facilitate quick and easy fitting. The seals are available in a choice of colours to suit your requirements or blend with decor.

Tested for 30 minutes with 10mm and 15mm to BS 476 part 22 & 31.1.

Tested for 60 minutes with 20mm 25mm and 30mm to BS 476 part 22 & 31.1.

Smokeseal to 100,000 cycle test.

LANTAC Building Control approved all sizes.

NHBC Type Approval.

Product Ref
Type
Fire Rating Profile Size Lengths
AF1004 FO Fire Only 30 mins 10mm x 4mm 2.1m/1.05m
AF1504 FO Fire Only 30 mins 15mm x 4mm 2.1m/1.05m
AF2004 FO Fire Only 60 mins 20mm x 4mm 2.1m/1.05m
AF2504 FO Fire Only 60 mins 25mm x 4mm 2.1m/1.05m
AF3004 FO Fire Only 60 mins 30mm x 4mm 2.1m/1.05m
         

Keywords: Building Control, Fire and Smoke Seals, Fire Door, Intumescent, Intumescent Fire, Intumescent Strip, Smoke Seal, Smoke Seals,

Contact Continental Fire Protection

Email

Print this page

Other products and services from Continental Fire Protection

06-Dec-2011

Continental Fire Protection Ltd » Services

To ensure we attain our goal of life safety, superior quality and compliance we will contribute towards the cost of a third party inspection of any and all our works, and wherever our products are used. To enhance our ability to uphold our high standards and quality systems we offer a full contract service to install our products. We provide an unprecedented operational difference; we document and archive all of our contracts and installations.


06-Dec-2011

Continental Fire Protection Ltd » Intumescent Strip - intumescent strip fire and smoke

An ASTRO intumescent graphite based fireseal contained within a PVC sleeve fitted into a rebate to either the leaves or the frame will in the event of a fire expand to many times its original volume and seal the gap around the door to provide a safe and effective barrier against the passage of fire, smoke and hot gases.


06-Dec-2011

Continental Fire Protection Ltd » Intumescent Downlight Cover

The fire is unable to penetrate the hole and the cover is able to give additional insulation protection to the ceiling void to reduce the chance of heat build up and ignition of flammable materials such as accumulated dust and insulation. To combat this the ASTRO Downlighter Cover has been developed to cover maximum protection for holes created by he introduction of a downlighter and to allow for maximum ease of fitting.