Styrobeck » Ambionse

By: Styrobeck Plastics  06-Dec-2011

Styrobeck » Ambionse

STRONG – SOLID – SIMPLE

 

Ambionse Insulated Concrete Formwork (ICF) provides strong and solid long lasting exterior walls for Residential Homes. Ambionse is energy efficient (R 3.0), acoustically quiet and can provide a fire rating of up to 4 hrs.

An Ambionse wall is constructed from two exterior polystyrene panels spaced apart by plastic bridges. The inner cavity has reinforcing steel both horizontal and vertical placed ready for concreted to be poured to fill the wall.

A good builder can construct with Ambionse and an Engineer will be required to specify the amount and type of reinforcing required for your specific project.

Ambionse Sizing

  • 190 series blocks 1200mm long x 300mm high x 190mm wide
  • 250 series blocks 1200mm long x 300mm high x 250mm wide
  • 300 series blocks 1200mm long x 300mm high x 300mm wide
  • Corner Blocks are available for 190 and 250 series blocks

Benefits by using Ambionse Building Blocks

  • No wood no rot
  • Stable reinforced concrete core
  • Continuous Insulation R3.0
  • Acoustic wall for a quiet interior
  • Energy Efficient
  • Long Lasting
  • Air tight walls

Examples of where Ambionse can be used are:

  • Residential Housing
  • Commercial Construction
  • Apartments
  • Foundation walls & footings
  • Retaining walls
  • Basement walls
  • Intertenancy walls
  • Swimming pool walls
  • Fencing and landscape walls

Have your favourite Architect design your new home in Ambionse and if you require a builder, then contact us for a recommendation.


Contact Styrobeck Plastics

Email

Print this page

Other products and services from Styrobeck Plastics

06-Dec-2011

Styrobeck » Cut Shapes

Customers will order the most suitable grade for their application, and we cut the polystyrene into the required shape or size. All our polystyrene is manufactured from virgin bead and no regrind is used in our process. Our expert cutting service can cut most 2D shapes and some examples are. Sheet cut with special shaped sides or ends.


06-Dec-2011

Styrobeck » Formflow

Form-Flow is installed against the membrane so as to protect the waterproofing seal from the back filling process of scoria,soil,stone and rock, which could penetrate and break the membrane seal. Back filling behind the Form-Flow should start with a granular drainage metal such as scoria or sand for a portion of correct thickness prior to the general backfill being put in place. Styrobecks Form-Flow board is made from 100% recycled Polystyrene.


06-Dec-2011

Styrobeck » Geofoam

Geofoamâ??s lightweight characteristics provide ease of handling, bulk fill, performance insulation, low water permeability as well as strength and deformation properties that complement every application. GEOFOAM is a solid block of Polystyrene and is available in 5 Â grade options. Bulk filling of large areas.


06-Dec-2011

Styrobeck » Insulation

This microcellular closed cell construction provides EPS with excellent insulating and shock absorbing characteristics with a  high strength to weight ratio. Sheet EPS is cut from a primary block measuring 5.025m x 1.225m x .525m thick. Polystyrene is a lightweight organic cellular plastic insulation material.