Dam tie-downs, excavation support, landslide mitigation, tieback systems, surface stabilization, foundations

By: Ancorloc  06-Dec-2011
Keywords: Strand Anchors

Advantages of Ancor Loc Grout Bonded Strand Anchors

High capacity – Anchors utilize a 15.2mm dia. 261 kN (ultimate stress) strand. The number of strands per anchor dictates the load carrying capacity of the anchor. From 1 strand to 31 strand anchors are available. Giving a ultimate load range from 261kN to 8091kN.

All Ancor Loc’s strand anchors utilize a small diameter greased filled high density polyethylene sheathing, allowing for a greater number of individual strands to be contained in a given drill hole size.


  • Dam Tie-Downs
  • Temporary Excavation Support
  • Landslide Mitigation
  • Permanent Tieback Systems
  • Slope Surface Stabilization
  • Foundations

Grout Bonded Strand Anchors

Keywords: Strand Anchors

Other products and services from Ancorloc


New EPOXY-LOC coating lasts 20 times longer than standard galvanizing

Pre-grouted bars will sag if longer than 6m and thus grout inside will crack thus durability issue as there may be a lack of confidence in the grout. As the variables affecting installation are greater with sheaths we believe that this is potentially the less durable option. There is little opportunity to see if the nail has been damaged by bad handling as the working components are not visible.


Manta Ray Earth Anchor Systems and Sting Ray Earth Anchor Systems

Unlike other mechanical anchors, the anchor only disturbs a small amount of soil as it is driven to depth, this is very important, because the soil the anchor is installed through is the soil the anchor is reacting against. Top Hammer or down-the-hole hammer rock drills are very effective for installation of Manta Ray and Stingray anchors. Boom mounted demolition breakers or compactions are very effective for driving MANTA RAY and STING RAY.


Anchorloc’s DUCKBILL anchor systems, lightweight and economical solutions to any anchoring application

Kit contains 3 Model 40 Duckbill Anchors with 12 feet of cable attached to each anchor, 3 tree collars, and 3 1/16” cable clamps – all pre-assembled. WIRE ROPE ANTI-THEFT ANCHORS.PREVENT UNWANTED MOVEMENT AND IMPULSE THEFT. 40 DTS Kit up to 3” diameter trees.


Williams Geo-Drill Injection Anchor System for fast and efficient soil anchoring

The system has historically been known as a “self-drilling anchoring” because the hollow fully-threaded bar serves as both the drill string and the grouted anchor, thus installation is performed in a single operation. Ancor loc proudly promote the Williams Geo-Drill Injection Anchor System, Williams Geo-Drill Injection Anchor System is today’s solution for a fast and efficient anchoring system into virtually any type of soil.


Grouted Bar Anchors, tie-back/tie-down anchors

Tie-down and other pre-stressed ground anchors work on the same philosophy as the tieback anchors with a load transfer to a structure. The anchor transfers the load applied to the bond length uninhibited through the failure zone by using a bond-breaker. Key elements to all these types of anchors include.


Anchorloc’s Soil Nails, in-situ reinforcement system, stabilization of excavations, slopes and walls

Ancor Loc’s soil nail components create an in-situ reinforcement system for the stabilization of excavations and slopes during top-down construction. After the drill hole grout is cured, the soil nails may be torque tensioned against the protective shotcrete face to a slight load if desired. Pull out capacity is a function of drill hole diameter, depth, over burden stress and the angle of internal friction of the in-situ soil.