Anchorloc’s DUCKBILL anchor systems, lightweight and economical solutions to any anchoring application

By: Ancorloc  06-Dec-2011
Keywords: Wire Rope

THE DUCKBILL PRINCIPLE

Duckbill Underground Installation Sequence

Applications

Tree Guy Systems


Securing potable structures

Duckbill Installation & How To Videos

Duckbill Anchor Specifications

TREE SUPPORT SPECIFICATIONS
Model No. Total System Guy Kits STD PAK PAK WEIGHT
40 DTS Kit
up to 3” (75 mm) diameter trees
Kit contains 3 Model 40 Duckbill Anchors with 12 feet (3.6 m) of cable attached to each anchor, 3 tree collars, and 3 1/16” (1.6 mm) cable clamps – all pre-assembled. Each anchor holds 300# (135 kg) in normal soil. 12 units 10 lbs.
(4.6 kg)
68-DTS Kit
up to 6” (150 mm) diameter trees
Kit contains 3 Model 68 Duckbill Anchors with 13 feet (4.0 m) of cable attached to each anchor with a turnbuckle in line, 3 tree collars, and 6 1/8” (3.2 mm) cable clamps – all pre-assembled. Each anchor holds 1,100 # (500 kg) in normal soil. 12 units 24 lbs.
(11 kg)
88-DTS
up to 11” (280 mm) diameter trees
Kit contains 3 Model 88 Duckbill Anchors with 15 feet (4.5 m) of cable attached to each anchor with a turnbuckle in line, 3 tree collars, and 6 3/16” (4.8 mm) cable clamps – all pre-assembled. Each anchor holds 3,000 # (1,360 kg) in normal soil. 4 units 30 lbs.
(13.5 kg)
68 RBK Kit
up to 3” (75 mm) diameter trees
Kit contains 3 model 68 Duckbill Anchors, 18 feet (5.5 m) of 1/8” (3.2 mm) tensioning cable, one ratchet tensioner, and complete installation instructions. 1,100# (500 kg) rated capacity per anchor. 6 units 13 lbs.
(6 kg)
88 RBK Kit
up to 6” (150 mm) diameter trees
Kit contains 3 model 88 Duckbill Anchors, 24 feet (7.2 m) of 3/16″ (4.8 mm) tensioning cable, one ratchet tensioner, and complete installation instructions. 3,000# (1,360 kg) rated capacity per anchor. 6 units 32 lbs.
(14.5 kg)
SECURITY/THEFT DETERRENT SPECIFICATIONS
Model No. WIRE ROPE ANTI-THEFT ANCHORS.
PREVENT UNWANTED MOVEMENT AND IMPULSE THEFT.
STD PAK PAK WEIGHT
68-ATI Kit contains 1,100# (500 kg) capacity anchor cabled with 5 feet (1.5 m) of 3/16” (4.8 mm) galvanized wire rope. 12 units 10 lbs.
(4.6 kg)
88-ATI Kit contains 3,000# (1,360 kg) capacity anchor cabled with 6 feet (1.8 m) of 1/4” (6.4 mm) galvanized wire rope. 6 units 10 lbs.
(4.6 kg)
68-ATC Kit contains 1,100# (500 kg) capacity anchor with 4 feet (1.2 m) of 1/4” (6.4 mm) proof coil chain attatched to 1 foot (0.3 m) of wire rope. 12 units 41 lbs.
(18.6 kg)
88-ATC Kit contains 3,000# (1,360kg) capacity anchor with 4 feet (1.2 m) of 1/4” (6.4 mm) proof coil chain attatched to 2 feet (0.6 m) of wire rope. 6 units 27 lbs.
(12.3 kg)
Multi-Purpose Specifications
Model No. Anchor Holding Power In Normal Soil Wire Rope Breaking Strength Galvanized Wire Rope Wire Rope Length Anchor Weight Standard Pak and Weight Box
40-DB1 300 lbs
(135 kg)
480 lbs
(220 kg)
1/16″ 7×7 GAC
(1.6 mm)
20 inches
(0.51 m)
1 oz.
(28 gm)
50/box
3.7 lbs (1.7 kg)
68-DB1 1,100 lbs
(500 kg)
1,700 lbs
(770 kg)
1/8” 7 x 7 GAC
(3.2 mm)
2 1/2 feet
(0.76 m)
4.5 oz.
(128 gm)
24/box
7 lbs (5.0 kg)
88-DB1 3,000 lbs
(1,360 kg)
7,000 lbs
(3,175 kg)
1/4” 7 x 19 GAC
(6.4 mm)
3 1/2 feet
(1.07 m)
14 oz.
(397 gm)
12/box
11 lbs (5.0 kg)
138-DB1 5,000 lbs
(2,270 kg)
9,800 lbs
(4,445 kg)
5/16” 7 x 19 GAC
(7.9 mm)
5 feet
(1.52 m)
2.5 lbs
(1.1 kg)
12/box
32 lbs (14.5 kg)
JACK HAMMER SHANK DRIVE STEEL
D L Drive #
7/8 3 1/4 78
7/8 4 1/4 79
1 4 1/4 10
1 1/8 6 18
1 1/4 6 14

Keywords: Wire Rope

Other products and services from Ancorloc

06-Dec-2011

New EPOXY-LOC coating lasts 20 times longer than standard galvanizing

Pre-grouted bars will sag if longer than 6m and thus grout inside will crack thus durability issue as there may be a lack of confidence in the grout. As the variables affecting installation are greater with sheaths we believe that this is potentially the less durable option. There is little opportunity to see if the nail has been damaged by bad handling as the working components are not visible.


06-Dec-2011

Manta Ray Earth Anchor Systems and Sting Ray Earth Anchor Systems

Unlike other mechanical anchors, the anchor only disturbs a small amount of soil as it is driven to depth, this is very important, because the soil the anchor is installed through is the soil the anchor is reacting against. Top Hammer or down-the-hole hammer rock drills are very effective for installation of Manta Ray and Stingray anchors. Boom mounted demolition breakers or compactions are very effective for driving MANTA RAY and STING RAY.


06-Dec-2011

Williams Geo-Drill Injection Anchor System for fast and efficient soil anchoring

The system has historically been known as a “self-drilling anchoring” because the hollow fully-threaded bar serves as both the drill string and the grouted anchor, thus installation is performed in a single operation. Ancor loc proudly promote the Williams Geo-Drill Injection Anchor System, Williams Geo-Drill Injection Anchor System is today’s solution for a fast and efficient anchoring system into virtually any type of soil.


06-Dec-2011

Grouted Bar Anchors, tie-back/tie-down anchors

Tie-down and other pre-stressed ground anchors work on the same philosophy as the tieback anchors with a load transfer to a structure. The anchor transfers the load applied to the bond length uninhibited through the failure zone by using a bond-breaker. Key elements to all these types of anchors include.


06-Dec-2011

Anchorloc’s Soil Nails, in-situ reinforcement system, stabilization of excavations, slopes and walls

Ancor Loc’s soil nail components create an in-situ reinforcement system for the stabilization of excavations and slopes during top-down construction. After the drill hole grout is cured, the soil nails may be torque tensioned against the protective shotcrete face to a slight load if desired. Pull out capacity is a function of drill hole diameter, depth, over burden stress and the angle of internal friction of the in-situ soil.


06-Dec-2011

Dam tie-downs, excavation support, landslide mitigation, tieback systems, surface stabilization, foundations

All Ancor Loc’s strand anchors utilize a small diameter greased filled high density polyethylene sheathing, allowing for a greater number of individual strands to be contained in a given drill hole size. The number of strands per anchor dictates the load carrying capacity of the anchor. Advantages of Ancor Loc Grout Bonded Strand Anchors. High capacity – Anchors utilize a 15.2mm dia. 261 kN (ultimate stress) strand.