Steelformers - ceiling

By: Taranaki Steelformers  06-Dec-2011

Ensure to use a string line or laser level to determine a level ceiling line. Perimeter C-Channel can be fixed to the top plate with the longer leg at the bottom so that the end of the Ceiling Batten can slot in to the Perimeter C-Channel. Batten Clips are to be fixed to the side of the truss or ceiling joist. Initially use the central fixing slot so that the clip can be adjusted up or down to achieve a level ceiling line. Once level, secure the Batten Clip firmly by utilising the other available fixing holes.

Span and Spacing Data

Truss/Joist Span (mm) Batten Spacing (mm) Lining Thickness (mm)
1200 600 13
1200 450 10

Recommended Fixings

10x16mm Wafer Head screw for fixing Perimeter C-Channel to Truss/Joist

3.2 Galvanised Rivet or Wafer Head screw for fixing Ceiling Batten to Perimeter C-Channel


Contact Taranaki Steelformers

Email

Print this page

Other products and services from Taranaki Steelformers

06-Dec-2011

Steelformers - spouting

The standard 80mm round downpipe is the most common selection because it suits all spouting profiles and has good volume for drainage. Round coloured steel or copper downpipes are available to compliment your spouting or contrast with your colour scheme. PVC downpipes and accessories are an option by request. Munzing Ring clips are available on request.


06-Dec-2011

Steelformers - flashings

The dimensions can be customised to meet your building requirements, such as purlin location or if extra length down the face of the barge board/fascia is required. Notched Barge Flashings are made to order in your desired length up to 8 metres. Turndown to suit profile i.e. 30mm for Styleline and 40mm for NC710.


06-Dec-2011

Steelformers - longrun

Corrugate is one of the most commonly used roofing and cladding profiles available, with traditional appeal, ease of installation and relative low cost. So whatever the choice, drape curved, bull nose, laid horizontally or contemporary - let your imagination run wild with Corrugate from Steelformers. Corrugate, being light and strong, finds immediate acceptance in both domestic and commercial markets.


06-Dec-2011

Steelformers - coatings

The use of other materials in proximity to COLORSTEELĀ® prepainted steel products must be in accordance with the New Zealand Steel Specifiers and Builders Guide. Blues are considered cool and refreshing, greens are restful and reminiscent of leafy glades and luxuriant growth. Sand spans the colours of the seaside to the richer desert hues.


06-Dec-2011

Steelformers - sheeting

Specifically designed for the harsh New Zealand environment, Laserlite 2000 is the ideal all-round transparent roofing.