MM 380A 15\\\" AUTO PLANER 462 / Thicknessors / Woodworking Machinery

By: Spida Machinery  06-Dec-2011

The MM 380A Planer is powered by a 3 HP single phase motor and has a planing capacity of 380mm wide by 203mm thick. A spiral serrated steel in feed roller and the polyurethane out feed roller keep stock moving smoothly and efficiently past the 3 knife cutter head.

 Feed rate is controlled by a 2 speed oil bath gearbox with a selection of either 5 metres or 9 metres per minute planning speed. Anti kick back fingers are fitted for operators safety, over head rollers for work piece return after machining and a large solid cast iron in feed and out feed table are provided.A full Cabinet Stand with trolley kit for easy moving, dust extraction port and knife setting gauge are also provided with this machine.

MODEL MM 380A

Width of Stock381mm
Thickness of Stock203mm
Table Size381mm x 508mm
Minimum Planing Thickness5mm
Cutter Head Diameter76mm
Cutter Head Speed5000rpm
Knives3
Feed Rates2 Speeds (5m or 9m per min)
Motor3HP Single Phase
WeightGW245kg NW202kg


Contact Spida Machinery

Email

Print this page

Other products and services from Spida Machinery

06-Dec-2011

Truss & Frame Machinery

Twin blade saw specifically designed for Birdsmouth, Plumb cuts and Stair Strings. Quick setting manual saw for angle & length component cutting. Complete CSS system with an additional trenching saw. Custom Table to make mitre/compound cutting easy. Quality radial arm saw with adjustable offset. Accurate production of timber components. Up cut docking saw with 18" Blade.


06-Dec-2011

CSS 378 / Cutting Machines / Truss & Frame Machinery

Set up left or right hand to suit your requirementsThe CSS package includes:• 3 metre / 10ft infeed roller table• 6 metre / 20ft bench outfeed table• CXM saw• Rockwell automation• Industrial flat touch screen• Custom designed software. O Clamping infeed tableo Drop saw tableo Laser Guideo Framing software and marking clamp. The CSS will cut at least double the amount of a manual saw. Jobs are downloaded to the saw via LAN or Removable Media.


06-Dec-2011

Cutting Machines / Truss & Frame Machinery

Quick setting manual saw for angle & length component cutting. Complete CSS system with an additional trenching saw. Quality radial arm saw with adjustable offset. Accurate production of timber components. Radial Beam style saw with 350mm Blade. Fully automated component cutting saw. Up cut docking saw with 18" Blade.