Warrior Wheel and Underbody Truck Wash | Rocktec

By: Rocktec  06-Dec-2011
Keywords: Wheel Wash

The Rocktec Warrior Wheel and Underbody Truck Wash has been designed to provide a convenient, efficient and fully automatic drive through wash for heavy vehicles.

The Warrior caters for all types of road going vehicles and is built entirely of steel to ensure long life in the most arduous conditions. The design of the wheel wash prevents the vehicle wheels from wearing the mainframe by raising the removable grates above the frame. This also gives the benefit of a continuous rumble effect helping to loosen dirt and shake off excess water.

The base of the warrior has been hot dipped galvanized to prevent any corrosion from both the environment and the water that is used. Solid, removable grates allow easy access for any cleaning or maintenance that may be required while a central walkway gives safe pedestrian access over the wheel wash.

As the truck approaches the Warrior the sensor activates the wash cycle, the sensor has been specifically designed to reducing nuisance tripping from external sources.
A horizontal end suction centrifugal pump is supplied to provide the necessary water to the 84 high pressure nozzles that have been carefully directed to clean the underbody, the inside and outside of the wheels, as well as the tread and between the duals.

Standard features:

  • fully automatic, ultra-efficient wheel and underbody truck wash
  • 4-metre wash length
  • 84 high-pressure jets arranged to give intensive spray pattern to wash all tyre and Underbody surfaces
  • automated drive-through system triggered by magnetic sensor
  • hot dipped galvanised base
  • caters for all types of road-going vehicles
  • side screens to contain overspray
  • adjustable side spray bars

Standard specifications:

Superior spray patterns

  • 84 carefully directed brass nozzles
  • 1100 litres per minute of water
  • 5-bar pressure
  • intensive washing of all surfaces of the wheels and underside

Pumping system

  • horizontal end suction centrifugal supplied complete as standard
  • 15kW, 2-pole, 2850rpm, TEFC-IP55 weatherproof, 415-volt/3-phase/50Hz electric motor

 Control system

  • automated control of washing cycles allow programs of varying lengths to be selected to suit site conditions
  • manual/auto switch allows for continuous running

Grate flooring

  • heavy duty replaceable floor grate flooring allows easy access to collection tray under wash unit
  • large gaps ensure no plugging with washed solids

Optional features:

  • available with complete water recycling and filtration
  • basic design easily adapted to suit particular site requirements
  • available for over-dimension and over-weight loads
  • optional pump configurations
  • entry and exit ramps.

Optional ramp/s add-on

  • specially designed to complement the main Rocktec Wheel and Underbody Wash system
  • entry ramps help loosen caked-on mud from between the wheels and underside of the chassis
  • exit ramps encourage water to drain off by gently vibrating the vehicle as it exits the wheel wash
  • ramps also allow the wheel wash to be positioned on existing sealed roads without the need to excavate

Optional water re-circulation system add-on

  • specially designed to complement the main Rocktec Wheel and Underbody Wash system
  • wastewater is collected beneath the grid work and is returned (via submersible pump) to a settling system
  • small infusion pump adds flocculant to the dirty water, ensuring the precipitation of waste solids in the tanks
  • clean water is drained off the settling system for subsequent re-use
  • accumulated waste solids are regularly removed from the tanks via single lever sluice valves.

Site requirements:

  • a 50mm mains water supply, or equivalent
  • a 30-amp, 415-volt, 3-phase and neutral, 50Hz electricity supply
  • suitable foundations - Rocktec will advise on the correct construction specifications to suit your site and supply layout drawings if required
  • cranage (4000kg lift) on the day of delivery/installation
  • plumbing from pump to wheel wash (pipe size dependant on distance)
  • plumbing from wheel wash to water discharge area.

Keywords: Wheel Wash

Contact Rocktec

Email - none provided

Print this page

Other products and services from Rocktec

06-Dec-2011

Products | Rocktec - Rock Technology

Rocktec’s experienced team can offer additional product information and application knowledge to make sure that you end up with not only the best value in new equipment, but also the correct equipment for your job. The following pages have been created to allow you to gain an overview of just some of the products and solutions available to you. Rocktec’s products provide innovative and proven solutions for New Zealand and the world market.


06-Dec-2011

Quarry & Mining Equipment | Rocktec

Rocktec's wheel washers, angled shaft impactors, impact crushers, scrubbers, screw dewaterers and feeders are highly engineered, fully supported products that utilise the latest technology to best advantage. Rocktec also manfactures a range of additional quarry and mining equipment designed to complement the key product ranges.


06-Dec-2011

Portable crushing & screening | Rocktec

All portable units are designed to suit specific customer and site requirements and to integrate with existing plant where possible. Rocktec has a long track record in the design and build of customer specific mobile plant. Feeder – Up to 17cu/m bin with Vibrating, oscillating, plate or belt feeder options. Screen can be integrated with crusher or feeder. Wide range of conveyor specifications.


06-Dec-2011

Sandvik | Rocktec - Rock Technology

Colin Spann, manager of Sandvik Mining and Construction NZ division, said distributing Sandvik crushing and screening products through Rocktec would give a number of advantages to both companies, as well as to customers.


06-Dec-2011

Hurricane Concrete Breaker | Rocktec

Cost-effective The Hurricane Concrete Breaker never has to be recharged and has a simple design with no high cost hammer points to replace, and no internal parts such as accumulators or pistons - hence no costly rebuilds. The Hurricane Concrete Breaker uses a broad, flat breaking surface that delivers maximum power and exceptional speed - up to 30 blows a minute - while maintaining extremely low carrier shock.


06-Dec-2011

Dewatering Equipment | Rocktec - Rock Technology

Rocktec has significant expertise in the separation of inorganic solids from process water particularly in the quarry, mining and Redi-mix industries.