Special Introductory Offer of only $299 for a limited time
The PegDriver drives pegs for your formwork cleaner and faster, saving you time on every job.
Reuse your pegs and Save money – Because the PegDriver is hitting the pegs square every single time, you don’t damage your pegs so you can throw them on the truck and take them to the next job.
Our Pegdriver system is so easy to use, anyone on your team can get the job done, even the part time labourer. Leaving you free to do the more important work.
Forged and heat treated to increase strength and hardness, the PegDriver is made to last.
Do the math.
Ok, math sucks. But here’s the thing… The PegDriver will pay for itself in next to no time. Probably purely in labour savings alone, leaving you to make a profit when you reuse your pegs on the next job.
Four models of Pilot Point attachments
What model of Concrete breaker do you use? The PegDriver comes in 4 models, with different attachments to fit your breaker.
The below table will tell you which model PegDriver you need to buy to fit your concrete breaker.
| Pegdriver model || Breaker model || Weight || Joules |
| A ||Bosch GSH27 ||29kg ||60 |
|Bosch BRUT ||32kg ||60+ |
|Makita HM1810 ||32 ||63 |
|Hitachi H905B ||32 ||55 |
|Dewalt D2598-EX ||32 ||68 |
| B ||Makita HM1317C ||17 ||33.8 |
|Hitachi H65SB2 ||16.5 ||42 |
|Bosch GSH 16-30 ||16.5 ||45 |
| C ||Hilti TE 1500-AVR ||14.2 ||30 at point |
| D ||Hilti TE 3000-AVR ||29.9 ||68 |
If you don’t yet have a Concrete breaker we highly recommend using only concrete breakers with a minimum of 40 Joules of impact power at the hammer point and a breaker that is a minimum of 14kg’s in weight.