Supercoat Coating Systems - Waterproofing

By: Supercoat  06-Dec-2011
Keywords: Autoclaved Aerated Concrete, Fibre Cement, Aerated Concrete

Supercoat Tanking Membrane

Supercoat Tanking Membrane is a liquid applied membrane for use in sealing and waterproofing a variety of exposed substrates. This membrane is particularly useful where substrates are subjected to weather, or areas subject to pooling of water or dampness. In some applications it is reinforced with Supercoat Tanking Mesh, a fine nylon netting fabric. Supercoat Tanking Membrane has been Appraised for use over Treated Timber Ply, Concrete Block, Concrete Tilt Slab, Fibre Cement Board, Coloursteel, Galvanised Iron, Zincalume, Steel and Autoclaved Aerated Concrete (AAC).

Supercoat Tanking Membrane - Keycoat

This product has aggregate added to aid bonding of subsequent layers of render and texture products. It can be applied directly to most surfaces, or as a top coat to Supercoat Tanking Membrane.

Supercoat Tanking Fabric

This is a fine polymer mesh fabric that the applicator encapsulates between the first two Supercoat Tanking Membrane layers and conceals with the third coat. The Supercoat Tanking Fabric reinforces the coating and provides greater resistance to movement. Its embedment and concealment ensures the correct thickness of Supercoat Tanking Membrane is applied.

Supercoat Deckshield

Supercoat Deckshield is a 100% Acrylic Thixotropic paste with graded aggregate for use on decks and roofs where general foot traffic may be expected. Deckshield is to be used as a final coat for Supercoat Tanking Membrane.

Keywords: Aerated Concrete, Autoclaved Aerated Concrete, Fibre Cement, Thixotropic Paste

Other products and services from Supercoat


Supercoat Coating Systems - Paint Finish

It's expecially good if you have to camouflage small wall bumps, cracks, or other imperfections as this finish does not reflect light. This is particularly suitable for the walls in the kids room, kitchens or bathrooms, or in areas which get a lot of traffic. With only a slight hint of shine or gloss, it's good for walls and holds up better with cleaning than a Flat finish paint.


Supercoat Coating Systems - Render Finish

Superbuild Render is our first tier full meshed base render, it's a high build, high strength reinforcement product containing graded sand, white cement, a high grade lime supplement, reinforcing fibre and additive, dry mixed product for use over most masonry substrates including Autoclaved Aerated Concrete.


Supercoat Coating Systems - Roof Coatings

Elastomeric, extended pure acrylic primer incorporating fillers, extenders, fungicide, anticorrosive properties with ceramic pigments to resist Ultra Violet light and increase durability. For priming new and weathered galvanized steel surfaces and touching up bare areas on metal tiles or galvanized iron without fear of affecting the original roof coating.


Supercoat Coating Systems - AAC Adhesive

AAC Superbond Adhesive is a high quality strong adhesive comprised of graded sand, cement, Calcium Carbonate and additive, dry mixed product for use as a structural Thin Bed Adhesive for Autoclaved Aerated Concrete substrates. AAC Superbond Adhesive is normally applied direct to the substrate using a notched trowel or dredge at a thickness of 2-3mm, Blocks & Panels must be rubbed together to ensure a strong bond has been created.


Supercoat Coating Systems - Textured Finish

Supersponge is a graded calcium sand, Portland cement, white cement high grade lime supplement and additive, dry mixed product for use over Superbuild Render, Superbase Render and Superskim Render. We use the highest quality graded 1mm (maximum diameter) texture aggregates sourced locally in New Zealand, the product is very creamy and easily applied for that perfect texture finsih.