Supercoat Coating Systems - Render Finish

By: Supercoat  06-Dec-2011
Keywords: Fibre Cement, Concrete Block

Supercoat Acrylic Flexibase

Supercoat Flexibase is a thick, high build acrylic base coat which can be used as a final coating on residential, commercial or industrial buildings, fences and sound barriers. It is highly flexible and therefore suitable in crack prone areas. Supercoat Flexibase can be pumped, roller applied or trowelled to the wall. It can also be stipple finished with a loop roller. Mesh can be added if increased strength and durability is required.

Minimum applied thickness – 1mm/per coat

Maximum applied thickness – 3mm/per coat

Supercoat Superbuild Render

Superbuild Render is our first tier full meshed base render, it's a high build, high strength reinforcement product containing graded sand, white cement, a high grade lime supplement, reinforcing fibre and additive, dry mixed product for use over most masonry substrates including Autoclaved Aerated Concrete.

Minimum applied thickness – 3mm/per coat

Maximum applied thickness – 6mm/per coat

Supercoat Superbase Render

Superbase Render is our second tier full meshed base render, it's comprised of a graded sand, Portland cement, high grade lime supplement and additive, dry mixed product for use over normal base coat renders and most masonry substrates including Autoclaved Aerated Concrete.

Minimum applied thickness – 2mm/per coat

Maximum applied thickness – 4mm/per coat

Supercoat Multitex

Multitex is a graded sand, white cement, high grade lime supplement and additive, dry mixed product for use over Porous and non-porous substrates such as;

- Clay Brick and Concrete Block Substrates

- Painted Solid Substrates

- Fibre cement sheet and EPS (expanded polystyrene)

Designed as a super strong adhesive plaster this materials scope consists of;

- Adhering of EPS (expanded polystyrene) or keyed XPS (extruded polystyrene) to solid substrates

- Utilised as a key coat over smooth surfaces such as painted or smooth substrates

- Can be applied with glass fibre mesh as a mesh coat or reinforcement in difficult areas

- Mixed as a slurry, applied to PVC (Polyvinyl chloride) components to be plastered or coated

Keywords: Concrete Block, Fibre Cement

Other products and services from Supercoat


Supercoat Coating Systems - Paint Finish

It's expecially good if you have to camouflage small wall bumps, cracks, or other imperfections as this finish does not reflect light. This is particularly suitable for the walls in the kids room, kitchens or bathrooms, or in areas which get a lot of traffic. With only a slight hint of shine or gloss, it's good for walls and holds up better with cleaning than a Flat finish paint.


Supercoat Coating Systems - Waterproofing

This is a fine polymer mesh fabric that the applicator encapsulates between the first two Supercoat Tanking Membrane layers and conceals with the third coat. Supercoat Deckshield is a 100% Acrylic Thixotropic paste with graded aggregate for use on decks and roofs where general foot traffic may be expected. Supercoat Tanking Membrane is a liquid applied membrane for use in sealing and waterproofing a variety of exposed substrates.


Supercoat Coating Systems - Roof Coatings

Elastomeric, extended pure acrylic primer incorporating fillers, extenders, fungicide, anticorrosive properties with ceramic pigments to resist Ultra Violet light and increase durability. For priming new and weathered galvanized steel surfaces and touching up bare areas on metal tiles or galvanized iron without fear of affecting the original roof coating.


Supercoat Coating Systems - AAC Adhesive

AAC Superbond Adhesive is a high quality strong adhesive comprised of graded sand, cement, Calcium Carbonate and additive, dry mixed product for use as a structural Thin Bed Adhesive for Autoclaved Aerated Concrete substrates. AAC Superbond Adhesive is normally applied direct to the substrate using a notched trowel or dredge at a thickness of 2-3mm, Blocks & Panels must be rubbed together to ensure a strong bond has been created.


Supercoat Coating Systems - Textured Finish

Supersponge is a graded calcium sand, Portland cement, white cement high grade lime supplement and additive, dry mixed product for use over Superbuild Render, Superbase Render and Superskim Render. We use the highest quality graded 1mm (maximum diameter) texture aggregates sourced locally in New Zealand, the product is very creamy and easily applied for that perfect texture finsih.