Powered Omni Decks and Right Angle Transfer Decks RATD for ULD reorientation and redirection

By: Mcgrath Industries  06-Dec-2011
Keywords: Air Cargo, Cargo Terminal, Air Cargo Terminal


McGrath Industries'

Powered Omni Decks

are used to reorientate and redirect ULDs as they move through an air cargo terminal's equipment system. Omni Decks can be configured to provide any combination of:

  • Linear Transfer
  • Side Shift or Right Angle Transfer
  • Rotation about deck centre, allowing ULDs to be switched between Narrow Edge Leading and Wide Edge Leading orientation.

Omni Decks may be installed at

junctions, as air side Dolly Docks, or incorporated into other equipment such as

,

,

and

.

For a non-mechanised ULD reorientation and transfer medium, please review our

Keywords: Air Cargo, Air Cargo Terminal, Cargo Terminal

Contact Mcgrath Industries

Email - none provided

Print this page

Other products and services from Mcgrath Industries

06-Dec-2011

Air Cargo Handling Equipment and Systems

McGrath Industries produces the most comprehensive range of specialised technology for aircraft ULD container handling within terminal and warehouse environments. Our product range covers the complete spectrum from high performance manually operated equipment to fully mechanised and automated systems. No one understands air cargo and the engineering to support it better than McGrath Industries. Large on-airport general freight Terminals.


06-Dec-2011

Roving Transfer Vehicles (RTV) compact vehicles for Air Cargo and Industrial Applications

RTV's can reduce fork-lift traffic plus reduce the quantity and spread of permanently fixed handling machinery, while opening up the entire warehouse for ULD operations. The Sidewinder RTV also includes dual axis drive modes, allowing it to switch from normal lengthwise vehicle drive to sideways operation. The Viper RTV and Sidewinder RTV can rotate on the spot about their own centre, allowing them to reorientate in the tightest spaces.


06-Dec-2011

Main Deck Workstations for loading or unloading freighter ULDs

We also provide a 20ft/Dual 10ft model which has two lift platforms that either operate in tandem for 20ft pallets or separately for independent 10ft pallets. Are used in air cargo terminals for added convenience and safety when loading or breaking down wide body freighter main deck pallets. McGrath Industries produces both "10ft" Main Deck Workstations and "20ft" Main Deck Workstations for the largest freighter unit.


06-Dec-2011

Powered Roller Conveyors for Air Cargo Facilities and Industrial Applications

As prime mover, a GI Conveyor can be traction driven in tandem with the vehicle's Cargo Deck, as it delivers or retrieves the ULD from the storage position. Our GII Conveyor has advantages for low profile applications such as floor level Workstation spurs used to load or breakdown ULDs. Other machinery with compact and low profile characteristics often utilise powered GII rollers.


06-Dec-2011

Transfer Vehicles and Transfer Shuttles for Airport Cargo Terminals

Our Transfer Vehicles are operated by an onboard driver while Transfer Shuttles are driven remotely by an operator or automated control system. Are the traditional rail mounted prime movers within the floor level ULD storage and transfer systems of large airport cargo terminals. McGrath Industries has a extensive range of Transfer Vehicle and Shuttle configurations to meet all terminal applications.


06-Dec-2011

Elevating Transfer Vehicles (ETV) for Airport Cargo Terminals

The ETV lifts and carries aircraft ULD containers between the floor level working and transfer environment and storage positions in the structure above. McGrath Industries' range of ETV's are structurally self supporting machines, and include single deck and dual deck models. Are the giant prime movers within the multilevel mass storage systems of large airport terminals.