Lesa Systems - Products - General construction

By: Lesa Systems  06-Dec-2011
Keywords: Stainless Steel

RETRACTABLE BOLLARD

The Dugite Retractable Bollard is a unique self locking bollard that when not in use is simply unlocked and lowered into the ground. These high security bollards are ideal for shops, car yards etc where bollards are required to be removed regularly. Available 90mm square 650 or 900mm high and can be keyed alike with a jimmy & dirt proof lock.


BOLT DOWN BOLLARD

Lesa Bolt Down Bollards are available in standard 1200mm lengths or can be custom made to order. Other options are square or 8 hole plate flanges, and sizes from 80mm to 600mm diameters in all finishes can be supplied.


REMOVABLE BOLLARD

Lesa Removable Bollards have a separate cast in ground mount that doubles as a locking device to the bollard. The hinged lid folds down flush to ensure a safe and smooth transition when the bollard is removed. Available in 125mm and 150mm diameters.


CAST IN BOLLARDS

Lesa Cast In Bollards are available in standard 1700mm lengths or can be custom made to order. Cast In Bollards are supplied complete with welded anchor bars and have the option of top caps. Sizes from 80mm to 600mm and in all finishes can be supplied.


DOWN PIPE PROTECTORS

Lesa's Down Pipe Protectors are available in standard or custom sizes and are complete with prepunched fixing holes. All are available in hot dip galvanised or powder coated in colour of chose.


POST & CHAIN BOLLARDS

All bollards are available with optional chain rings or brackets for attaching wire rope or chain.


HOOPED BARS

Lesa Hooped Bars are fabricated to order and have optional ground mounts for those who prefer the flexibility of removing. Hooped bars are available in Stainless Steel or Mild Steel in your chose of finish.


FOLD DOWN BOLLARDS

Image Fold Down Bollards have been designed for applications such as vehicle access, control and parking space protection. In the lay flat position it stands only 80mm with a broad flat face of 150mm wide for greater visibility. The flat face allows optional signage or reflective tape to be attached. Available as surface mount or can be used with an in ground kit. Fold Down Bollards are supplied with all necessary fixings and padlock.


SKIPPER - CONE BARRIER


POST & RAIL SYSTEM

The Modular Barricade System from Image is ideal for use in car parks, factories, shopping centres, etc, or anywhere where vehicles and pedestrians need segregating. The galvanised or powder coated surface mounted posts are 900mm high, and the rails are available in 2, 3, or 6 metre lengths. The Post & Rail System can be installed on sloping ground and is supplied with all necessary fixings to install.


BULLDOG BRACKETS

Image Bulldog Brackets are designed to protect pallet racking legs that are often supporting many tonnes of product. Damage to racking by forklifts, trolleys and other picking equipment can be significantly reduced by protecting the structural members. Bull Dog Brackets are manufactured from 5mm steel plate, stand 345mm high and are supplied powder coated in safety yellow will all necessary fixings.


Keywords: Stainless Steel

Contact Lesa Systems

Email - none provided

Print this page

Other products and services from Lesa Systems

06-Dec-2011

Lesa Systems - Products - Surface Finishes

The balance of the structure exists to control the atmosphere in which the work activities take place, and to provide security for the building. We have the largest range of concrete floor finishing products of any independent supplier in New Zealand. The surface finish of a concrete floor must suit the operation for which the building is intended. We can assist in the selection of the most suitable floor finish for any building.