Ledachem

By: Leda Extrusions Nz  06-Dec-2011

Features:

  • Excellent dimensional and heat stability
  • Excellent resistance to acids and alkalis
  • Good abrasion properties
  • Withstands corrosive atmospheres
  • UV resistant in Black
  • Does not support microbial growth
  • Manufactured from FDA approved material (natural)

Applications:  Pneumatic and chemical lines where Polypropylene's superior chemical resistance to Ledathene, Ledalon and Ledaflex is required. 

MATERIAL PROPERTIES
Specific Gravity 0.9± 0.02
Tensile Strength 34.0 MPa
Elongation at Break 450%

These properties are based on data which is believed to be reliable. They are given for information only as we cannot accept responsibility for operations outside our control.

STANDARD SIZES & SPECIFICATIONS
   Item Code    Outside Diameter    Tolerance   Nominal ID Min Bend Radius Standard Coil
  mm mm mm mm m
PP 6 6.00 +0.05/-0.10 3.75 60 100
PP 8 8.00 +0.05/-0.10 5.50 80 100
PP 10 10.00 +0.05/-0.10 6.8 110 100
PP 12 12.00 +0.05/-0.10 8.60 120 100


Contact Leda Extrusions Nz

Email

Print this page

Other products and services from Leda Extrusions Nz

06-Dec-2011

Leda Kynar Flex

Whilst this tube is supplied in coils to allow for continuous runs, the use of fittings for direction changse is required. Used where exceptional chemical resistance and/or excellent UV resistance are of prime importance. Excellent resistance even at elevated temperatures, including chlorine and acids. Excellent abrasion, impact and tensile properties. UL 94 V0 Fire rating with low smoke rating. Very low moisture absorption rate.