Concept 3000 / 4000 Standard 2 Door Access Module

By: Kj Systems  06-Dec-2011
Keywords: Door, Monitoring Station, Single Door

·        In Large Cabinet with 1.75 Amp PSU

·        Dual card, card and pin, anti-passback options available

·        Card only operation also available

·        Comprehensive interlocking

·        System inputs:

o    Separate EOL Supervised Door Reed and Tongue Sense Inputs for each door

o    DOTL and Door Forced System Inputs

·        All alarms generated by Inputs are programmable for reporting to a monitoring station

·        Connects directly to the LAN

·        Supports either Wiegand or Magstripe reader output format

·        Compatible with 5 volt or 12 volt readers

·        Supports the following card formats:

o    Magnetic swipe, Magnetic swipe last, Magnetic insertion, Wiegand 26, 27, 30, 32, 34, 35 36, 37, 40 bit

·        Support User Definable Card Format up to 40 bits (Wiegand) or 15 characters (Mag Swipe) as well with the new 4.5 firmware

·        On-board diagnostic LEDs to assist with troubleshooting

·        Up to 2 readers can be connected

·        2 lock relays switching up to 5 amps DC

·        Each door has:

o    Door Reed Input - Tongue Sense Input - REX and REN Inputs

o    3 Auxiliaries typically for Valid & Invalid Card and DOTL warning

·        Selectable single door or two door mode access mode

Keywords: Door, Monitoring Station, Single Door

Other products and services from Kj Systems

06-Dec-2011

Concept 3000 / 4000 Single Door Access Module

All alarms generated by Inputs are programmable for reporting to a monitoring station. Separate EOL Supervised Door Reed and Tongue Sense Inputs for each door. Supports either Wiegand or Magstripe reader output format. Concept 3000 / 4000 Single Door Access Module. Compatible with 5 volt or 12 volt readers. Supports the following card formats. DOTL and Door Forced System Inputs. Separated 500mA Reader Power Fuse.


06-Dec-2011

Concept 4000 Intelligent 4 Door Access Module

Any combination of card reader and REX button are also supported as long as the maximum numbers of door count and card reader count remain at 4 and 8 respectively. Supports up to 48 Intelligent 4 Door Controllers with 512K memory under the new ‘Access 2’ memory configuration. Full card database to maintain normal access control functionalities during temporary LAN failure.