Concept 3000 / 4000 Single Door Access Module

By: Kj Systems  06-Dec-2011
Keywords: Door, Alarms, Monitoring Station

Concept 3000 / 4000 Single Door Access Module

 

  • In Standard Cabinet with 1.75 Amp PSU
  • Comprehensive interlocking
  • System inputs:
    •  Separate EOL Supervised Door Reed and Tongue Sense Inputs for each door 
    •  DOTL and Door Forced System Inputs
  • All alarms generated by Inputs are programmable for reporting to a monitoring station
  • Connects directly to the LAN
  • Supports either Wiegand or Magstripe reader output format
  • Compatible with 5 volt or 12 volt readers
  • One on-board 1A lock relay output
  • One open collector output, software configurable
  • Supports the following card formats:
    •  Magnetic swipe, Magnetic swipe last, Magnetic insertion, Wiegand 26, 27, 30, 32, 34, 35, 36, 37, 40 bit
  • Support User Definable Card Format up to 40 bits (Wiegand) or 15 characters (Mag Swipe) as well with the new 4.5 firmware
  • Separate tamper input
  • Separated 500mA Reader Power Fuse
 

Keywords: Alarms, Door, Monitoring Station, Single Door

Other products and services from Kj Systems

06-Dec-2011

Concept 3000 / 4000 Standard 2 Door Access Module

O Separate EOL Supervised Door Reed and Tongue Sense Inputs for each door. Supports either Wiegand or Magstripe reader output format. Dual card, card and pin, anti-passback options available. Compatible with 5 volt or 12 volt readers. O DOTL and Door Forced System Inputs. Supports the following card formats. In Large Cabinet with 1.75 Amp PSU.


06-Dec-2011

Concept 4000 Intelligent 4 Door Access Module

Any combination of card reader and REX button are also supported as long as the maximum numbers of door count and card reader count remain at 4 and 8 respectively. Supports up to 48 Intelligent 4 Door Controllers with 512K memory under the new ‘Access 2’ memory configuration. Full card database to maintain normal access control functionalities during temporary LAN failure.