Motus Hydraulics | EasyRam Range

By: Hustler Hydraulics  06-Dec-2011

Perfect if you are creating or modifying a piece of equipment and require a 'standard solution'.

You don't want a special build and you need to know that down the track you can get your hands on another one just the same. EasyRam has just made your task a whole lot easier.

Choose our most popular style, (ESR Solid Base Style) available in a range of sizes, or four other convenient formats: ESR Tongue Style, ESR Clevis Style, ESR Ballend Style or ESR Blank Style.

All come with the unique Motus trace number system and over 48 years of ram crafting.

Solid Base Style

Our most popular ram.  Solid base with collar on the shaft end. 

 Tongue Style

 Single tongue on base, collar on shaft.

 Clevis Style

 Double clevis on each end.

Ball End Style

Swivel ballend on each end.


The most economical option especially with complex and/or expensive end fittings.  No ends supplied with this one - you can attach your own.

Other products and services from Hustler Hydraulics


Motus Hydraulics | Products | Toplink cylinders, Sprayboom, Crowd, and Logsplitter rams

We have 4 main product ranges - but the bottom line is - we can make whatever you need. Competent Motus staff will guide you in the right direction. We can cater to any requirements.


Motus Hydraulics | Ag Range

New Zealand’s widest and most comprehensive range of hydraulic Toplink cylinders, designed to suit your tractor. Our LB2.5 with 75mm travel each way suits 48-80hp tractors, or LB2.0, LB3.0. The 3 x 2 PC25 is our most popular followed by the 3 ½ x 2 PC30. We keep a wide range of standard cylinders on the shelf. Typical SAE sizing, double clevis ends with 1” pins.


Motus Hydraulics | RamBuilder Range

This is’truly the simplest way to make a ram to your custom specifications.. Double acting cylinders are available with stroke lengths from 15mm up. Our robust ports are machined from solid 1040 bar. Buy as a ‘blank’ cylinder and add your own ends. Just mix and match to suit your application.


Motus Hydraulics | Special Range

Stainless Steel - Grade 2205 Duplex centreless ground stainless steel can be specified on most cylinders for greater corrosion resistance. Can be produced with different thicknesses, widths and pin sizes. Includes another six additional bore and shaft combinations. Induction hardened - for a tough, damage-resistant surface. Oil transfer tubes can be added.


Motus Hydraulics | XCEL Range

Integrated heavy duty head design, coupled with high quality seals, Xcel is equipped to work at pressures up to 3000 psi. The same legendary service you have come to expect from Motus. Thanks for prompt service and quality products.. The diagram shows a typical imperial cylinder.