GENERAL ACOUSTICS Echosounding, Sub-Bottom Profiler, Water Level Gauges and ADCP Interpolation - index ultralabuws

By: General Acoustics  05-Apr-2012
Keywords: Level Gauges

The UltraLab UWS is a Miniature-Echosounders to measure bathymetry, erosion and sedimentation in model beds, flumes or channels without emptying the model. It measures distances in water from 2cm up to 15m in an accuracy of 1mm. Also moving sand dunes can be measured in a high resolution.

The UltraLab UWS works with an ultrasonic impulse-travel-time procedure. It was developed for highly time- and position-resolved measurements of distances in fluids. With optional sensors, measurements through container walls are also possible. The easy to use laboratory measuring instrument UltraLab UWS is distinguished by its various functions and configurations, which enables its use for complex measuring tasks:

Measurement objects may be the bottom, a target within the fluid, or the surface of the fluid. A complex measuring algorithm ensures a high accuracy and resolution, as well as a high data security.

The measured distance is directly shown on a four digit display. The according analog voltage value is send out through a BNC socket at the front of equipment. The measured range, as well as the output voltage can be adapted to the requirements of the overall measuring system.

(328 KB)

(700 KB)

(90 KB)

Keywords: Level Gauges

Other products and services from General Acoustics

05-Apr-2012

GENERAL ACOUSTICS Echosounding, Sub-Bottom Profiler, Water Level Gauges and ADCP Interpolation - index dslpSBP

Complete Stand-Alone System and Easy System Integration. Highest Detection Probability of Objects and Layers. Typical Seabed Penetration up to 10 m (in Sand. Highest Productivity for Result Generation. Suitable for a Wide Range of Survey Tasks. Shallow Water Surveying starting at 1.5 m.


05-Apr-2012

GENERAL ACOUSTICS Echosounding, Sub-Bottom Profiler, Water Level Gauges and ADCP Interpolation - index logadslp

LOG_aDSLP uses thereby interactions which are dependent on signal frequency as well those which are independent from signal frequency.The results are precisely determined layer interfaces and their material-stages. At all times the results are brilliantly clear, precisely defined and operationally valid in every complex stratification (e.g. sandy suspensions, muddy areas).


05-Apr-2012

GENERAL ACOUSTICS Echosounding, Sub-Bottom Profiler, Water Level Gauges and ADCP Interpolation - index logalevel

High performance ultrasonic sensors guarantee robust, reliable, fast and precise measurements of all kinds of water levels and its dynamics. LOG_aLevel is a complete, remote sensing, stand-alone water level gauge on the basis of ultrasonic sensors. The power is supplied via 12 V DC or 110/230 V AC (optional windgenerator or solar panel). The system works automatically and is independent of any external connections.


05-Apr-2012

GENERAL ACOUSTICS Echosounding, Sub-Bottom Profiler, Water Level Gauges and ADCP Interpolation - index ultralabuls

The is an easy to handle ultrasonic laboratory measuring system, which measures water levels and waves fast and precisely, e.g. in basins, flumes, surface water models and towing tanks. A relative horizontal speed of 2-4 m/s against the wave is possible depending on the application and wave parameter.