AN60-6 Low Profile Aircraft Scales Weighing System

By: Gec  06-Dec-2011
Keywords: Scales, Weighing, Weighing Systems

Low Profile:  The AN60-6 height is than 2.25", half the height of most scales of this capacity. Enables the use of lightweight accessories and eliminates the need for long approaches to the weighing area.

Lightweight:  The AN60-6 weight is half that of comparable scales. One person can easily carry and setup the AN60-6 scales.

Large Capacity:  The AN60-6 weighing systems have a capacity of up to 60,000 pounds per platform.

Accuracy: These GEC weighing systems are remarkably accurate - up to ±0.1% of the applied load (or 10 pounds) with excellent repeatability.

Scale Leveling:  No leveling or electronic devices needed to correct for uneven surfaces.

The CG Mastermind Handheld Computer: The optional Handheld computer is pre-programmed device that communicates wirelessly with multiple platforms. Which calculates weighing results are available instantaneously, data includes Moment; gross weight; reaction point weight; lateral weight distribution and CG in both inches and % MAC, total arms.

Transportability: The AN60-6 can be moved very easily from site to site and aircraft to aircraft. The contract weighing department of GEC has been using the AN60-6 since 2000 and has shipped the scale to all parts of the world without the need for recalibration.

Keywords: Scales, Weighing, Weighing Systems

Other products and services from Gec

06-Dec-2011

Aircraft Scales | GEC Scales

These GEC weighing systems are remarkably accurate - up to ±0.1% of the applied load with excellent repeatability. Lightweight: The LPA400 is easy to move from one aircraft and one location to another. Large Capacity: The LPA400 platforms have a capacity of up to 30,000 pounds each. Each platform weighs only 30 pounds so you can carry them in a car trunk. Low Profile: Less than two inches high, no ramps are needed.


06-Dec-2011

Services | GEC Scales

GEC is and will be an engineering company organized to develop new ideas, solve problems and find improvements for the measuring of weight and balance through the use of technology and constant search for new applications and uses. GEC is committed to growth through the development of new technology and products, utilizing the highest standards of quality and service.