FLOORCOAT NEW ZEALAND - Gym or Hall Floor Sanding

By: Floorcoat  06-Dec-2011
Keywords: Floor, Floor Sanding

Large area industrial floor sanding is our speciality affciate

Floorcoat NZ has the fastest hardwood floor sanding team in NZ for stadiums and gyms, including line markings and coating. We travel any where in NZ.

We specialize in large floor areas with the fastest turn around time, making sure your facility is given back to you, ready to use or hire out, saving you time and money.

Our latest machinery, which is the first in NZ delivers perfect flat sanded floors in efficient record time. It sands floors 6 times faster than any machinery presently available.

We can hard sand the poly coats and line markings  off at a rate of about 500-600 SQ/M2 a day with fine sanding at a rate of 2,500 SQ's per day. 

Check the link out bellow to watch one of our sanders in action.

We can easily have a 1200 SQ/Meter floor from start to finish, including line marking and coating done in 6-8 days with the latest basket ball court markings.

We use the latest in sports floor coatings and line marking systems, giving you a perfect finish with accurate straight lines. Our coatings are eco friendly with no smell. They are extremely hard wearing and meet the latest din rated standards.


Keywords: Floor, Floor Sanding

Contact Floorcoat

Email - none provided

Print this page

Other products and services from Floorcoat



Floor sanding is the process of sanding the top surface of the floor, be it timber, cork tiles, particle board or even parquet. If proper maintenance is not kept then these coatings will be compromised, this will lead to a re-sand of the entire floor. The areas where the large sanders cannot reach, such as edges, corners, and stairs, are sanded by an edger/hand tool.


FLOORCOAT NEW ZEALAND - Concrete Polishing

Concrete polished floors is the process in which concrete is ground to a desired look to expose very little stone to large amounts of stone. Then by use of special resin diamonds, the concrete is then polished to a fine glossy finished. There are now new full water proof polished systems available for your polished concrete. Polished concrete has excellent thermal qualities and is a very cost effective product.



The process in which we use concrete grinding machines - (be it hand held or massive 4 head planetary grinders) - for removal of concrete for shaping a foot path, preparation for tiles, grinding to expose stones etc. These shoes come in different density's for different grades of concrete from soft to hard, plus different corse, very similar to grades of sandpaper. Concrete grinding - Removal and shaping of concrete for varies reason.



Staining is used to change the colour of either the concrete or the timber floor. This can be a full block out colour or it could be a tint. Here is an example of Rimu that has been darken. This insures a brighter, tighter cleaner look. Staining of the grain or the wood its self. Staining of wooden floors or concrete. Staining of the coat or colouring.



Types of coatings vary from sealers that sit in the surface of the concrete, special water proofing liquids that penetrate and solidify to top coating systems the bond to the surface of the concrete. The wrong product will brake down letting the chemicals migrate their way into the concrete substrate. Coated or Sealed Concrete are top coats used to protect or beautify the concrete substrate.


FLOORCOAT NEW ZEALAND - Industrial Coatings

The right coating will have many benefits - increased light reflectivity, fast cure epoxy resins with no smell, increased safety, durability thermal shock, ability to with stand heat, chemicals and anti skid to name a few. Epoxy coatings or screeds for industrial use for factories, air craft hangers, cow sheds, dairy factories, garages etc.