Acrylic Waterproofing Membrane:
Resene X-200 is an acrylic waterproofing membrane incorporating the most recent advances in polymer and paint technology. Shows significant advances in the areas of film build, adhesion, penetration, application and durability. For Interior and Exterior Concrete blocks, Concrete surfaces and Fibre reinforced cement. Resene Flexicover E
High Build Elastomeric Membrane:
Thixotropic waterproofing membrane designed for thick application over concrete surfaces. Flexicover E is based on the recent development of tough acrylic elastomers, which have an excellent "memory" of their original shape when distorted. Improved dirt pick up and crack bridging properties are also of significant benefit.
Aquapoxy For Flooring
- Ideally suited for structures which will flex and develop minor cracks. Protects flexing structures from concrete carbonisation by maintaining a seal over the micro cracks which develop.
- Can be used on Concrete Road Bridges, High Rise Concrete Buildings and all other Cementitious Surfaces.
Resene Aquapoxy is a two pack water-based epoxy polyaminoamide. The cured film is glossy and non-yellowing with high surface hardness . It has excellent adhesion and water resistance, and is tolerant of application over damp surfaces. The chemical resistance is similar to conventional solvent based epoxies. Aquapoxy is available modified with S.R.G Grit to prevent a non-skid surface. This is achieved with some sacrifice to clean ability. An excellent compromise consists of one coat of S.R.G modified Aquapoxy followed by one coat of unmodified Aquapoxy.
- Can be used on Sound existing paint for improved protection, Garage Floors and Primed Steel.
Urethane-acrylic semi-gloss finish:
A unique high performance two component finish coat with excellent resistance to abrasion, moisture, petroleum solvents and mineral and vegetable oil. The most unusual feature of Uracryl 402 is that, unlike most other classes of high performance coatings, it looks as well as it protects. The sophisticated combination of aliphatic urethane's and urethane reactive acrylic resins gives a system unsurpassed for durability and colour retention.
- For Interior and Exterior Marine Environments
- Chemical Plants
- Concrete Wall Surfaces
- Hotel and Motel Rooms
- Office Blocks
- Previously Painted Surfaces
- Roofing and Structural Steel
Granital is silicate based, ready to use exterior paint. It is easy to process and very economical because of its exceptional durability. In combination with KEIM-Contact plus it can be applied to virtually all types of substrate.
Natural ingredients are the fundamentals of the unique quality of KEIM's mineral paints: The binder, liquid potassium silicate whose structural form and hardness is akin to naturally occurring crystals, mineral fillers and inorganic colour pigments.