DeltaValves: Actuators

By: Delta Valve  06-Dec-2011
Keywords: Stainless Steel, Self Contained, Carbon Steel

High cycle capability.
Torque range 11Nm – 4617 Nm. Operating temp -50 deg C – 150 deg C.

Scotch Yoke heavy duty actuators suitable for offshore/petrochemical environments.
Carbon steel or ductile iron construction, welded spring cartridge and plated cylinders.

Torque range 300Nm – 100,000 Nm.


H ydraulic and Electro Hydraulic
Rack and pinion, Helical and scotch yoke actuator designs available on indent.

Self contained electro hydraulic packages incorporating pump, motor and controls.

Stand alone HPU systems and associated controls. Water operated, pressure sensing solutions.

Electric
¼ turn, single phase electric actuator IP66.

Torque range 13 Nm – 276 Nm. On/off and modulating duty (4-20 mA), Exd certified.

Multi turn 3 phase and ¼ turn (WTR or HBC gear boxes).

Torque range 75-597 Nm, Thrust 35-158 kN greater with G/box. IP68 , Flameproof, ATEX, CE approved.

Wide range of field network devices available.

Switch Boxes
Full range of IP65-67 boxes available in polycarbonate, Aluminium and stainless steel with 3D visual indication.

Switches are SPDT, DPDT, proximity, V3 and barrel type sensors. 4-20 mA transmitters, communication cards.

Positioners

Pneumatic and electro pneumatic positioners 3-15 psi or 4-20 mA input (output option).

Solenoids
Direct acting or pilot operated solenoid valves 3/2 or 5/2 configurations.

NAMUR style or Stainless steel EExd, EExia or non hazardous.

Keywords: Carbon Steel, Self Contained, Stainless Steel

Other products and services from Delta Valve

06-Dec-2011

DeltaValves: Butterfly Valves

Connections: Wafer pattern, Semi Lugged, Fully Lugged, Double Flanged, Butt WeldSizes: 50mm to 1200mmPressure range: 150 to 2500 lbApprovals: BS5155, ISO5752, ISO5211, API609, API607 rev 4, BS6755. Material Options: Body – DI, Stainless steel, Carbon steel, Ali Bronze, Cast Iron, Alloy steels.


06-Dec-2011

Gate, Globe & Check Valves

Connections: Flanged, ANSI 150 -2500, Screwed NPT/BSP, Butt or Socket Weld.Class 800. Design Specs: Steam, gas, Liquid service, Petro-chem, cryogenic. Wafer pattern, dual plate.Quick opening Globe.


06-Dec-2011

DeltaValves: Ball Valves

A44 three piece ball valve for general purpose use.Available in a variety of materials with a range of end connections.Suitable pressures from full vacuum to 207 Bar g, 8mm to 25mm.Up to 138 Bar g, 32mm to 50mm, 69 Bar g for 65mm and 50 Bar g for 80mm to 150mm.Comply with BS.5159, EN ISO 10497.


06-Dec-2011

DeltaValves: Control Valves

Trim: Single and Multi stage, MLT, soft seat, Stellite 6, Balanced and unbalanced.Trickle trim, linear, equal percentage and semi throttle. Double and Tripple offset designs, soft or metal seat, fire safe, Geothermal full stellite duty, Double block and bleed. Control Options: Cylinder or diaphragm pneumatic, hydraulic and electric,4-20 mA positioner, digital controlers.


06-Dec-2011

DeltaValves: Humidification & Hot Water

ELECTRIC HUMIDIFIERS The Humidi Clean electric humidifier includes five disposable inserts made of fibrous medium.Called ionic beds, these devices attract solids from the boiling water, preventing the solidsfrom plating out on the heating elements or on the tank walls.Tank cleaning is minimized and effective service life is extended.


06-Dec-2011

DeltaValves: Pressure & Temperature

Temperature regulators designed to control the output temperature on a wide range of applicationssuch as: storage tank heaters, open tank heating coils, air heater units, engine and compressor cooling systems.Valve sizes and connections: 15mm to 50mm with screwed end connections.