S.E.D. Croft Poles..These
are poles that are shaver peeled to produce an even smooth finish
but are still left with the trees natural taper for maximum structural
strength. These are used anywhere strength is required, for instance,
these poles are widely used in New Zealand for retaining walls,
utility poles and house foundation piles. These are generally treated
to hazard class H5 for critical end use including use in fresh water.
Croft Marine Piles..These
are basically the same specification as S.E.D. construction poles
but are treated to hazard class H6 marine level. We can custom peel
such piles to your requirements within the limitations of the trees
natural taper to provide maximum taper where strength is important,
or minimise the taper to allow the pile to fit through pile guides
Lazerlog..These are produced
to a set diameter and have a machined uniform finish i.e. a 200mm
or eight inch pole is machined to 200mm from end to end and resembles
a large piece of dowling. These are generally used for landscaping
and low level retaining walls where aesthetic appeal is more important
than structural strength. They are also popular for play grounds,
horse jumps and fencing.
Sawn Timber Products..We
are capable of producing just about any form of sawn timber size.
Good volumes of 100x25mm, 75x25mm and 50x25mm are available for
local and export markets in both sawn and planer gauged finishes.
These sizes are commonly used for cavity batten, furniture manufacture,
gate making or laminated to make a range of different products such
as scaffolding planks.
For the domestic market we produce
a wide range of CCA treated outdoor products for such uses as sub-floor
and foundation, decking and bridge building, retaining wall planks,
floating pontoon timbers, farm fence rails, stock yard timbers,
large square sections and guard rail barrier posts.