Truss & Frame | Lumberworx

By: Lumberworx  06-Dec-2011

LVL 11

The structural uniformity of LVL makes it the perfect solution for predictable, strong and lightweight truss chords. It is the preferred option for attic and coved trusses. E11 represents the standard grade for LVL truss chord and is included in Mitek and Pryda fabricating software. The product offers improved performance over standard timber as window and door lintels as a double nail laminated member.

Truss chord is available in 90, 115, 140, 190 & 240mm depths x 45mm thickness and in 90x35mm sizings.

Contact Lumberworx

Email - none provided

Print this page

Other products and services from Lumberworx


Products | Lumberworx

In a category where there was once only plywood, there are many engineered wood products, including structural wood panels, composite panels, laminated veneer lumber and prefabricated wood I-joists. Builders and consumers have adopted EWPs throughout North America and Europe and New Zealand is now embracing this trend. New ways to apply technology result in increasingly superior usability.


I-Beams | Lumberworx

They offer designers more flexibility with longer spans and the ability to cut service holes in the webs and builders favour the light weight and quicker installation time. 65 Series I-Beams are a unique combination of timber components and advanced technology forming a structurally superior solution for construction. Lumberworx I-Beams must be installed in accordance with Lumberworx technical literature.


Laminated Veneer Lumber (LVL) | Lumberworx

Lower depth members can be used where depth is critical for floor joists and rafters and full depth members can be used in the same project as 45mm LVL to achieve longer spans where required. 63mm LVL is suited to commercial applications such as rafters, roof beams, floor joists and bearers, and in commercial timber framed buildings. Suitable l for a wide range of uses, it is available in E11 and E13 grades.


Sundries | Lumberworx

This standard avoids asymmetric loadings onto perimeter I-Beams after wind or seismic action, and means the builder does not have to fit web stiffeners to I-Beams after upper floor frames have been put in place. All rimboards and boundary joists are available as Engineered Wood Products to ensure timber shrinkage rates are similar for all members to avoid uneven loadings.


Full List & Summary | Lumberworx

460x90 & 610x90 available on special order only. Engineered Rimboards - 4.5 Fixed lengths. Engineered Rimboards & Boundary Joists.