Panel Clips, Fasteners and tools list

By: Fastmount  06-Dec-2011

Panel Clip set = PC-M1A+ PC-F1 Standard self tapping system suitable for most applications, using PC-F1 & PC-M1A1, fit with CT-03 & CT-10

Part # PC-01

Panel Clip - self tapping male Screws into 10mm hole drilled with CT-01, or CT-09. Install with CT-10 (CT-04 can also be used) Fits into PC-F1, PC-SF1, PC-RF1, PC-AF1

Part # PC-M1A

Panel Clip - self tapping male heavy duty (black) Fits into PC-F1, PC-SF1, PC-RF1, PC-AF1, mounts into 10mm hole CT-01, CT-09. Install with CT-10. Minimum panel thickness 9mm.

Part # PC-M2H

Panel clip - Vario self tapping Male Variable gap, high shear strength self tapping male. Clips into PC-F1, PC-SF1, PC-RF1, PC-AF1 Mounts into 10mm hole CT-01, CT-09. Install with CT-10. minimum panel thickness 9mm.

Part # VS-M1

Panel Clip - surface mount male Adhesive fix super-groove base. Fits into PC-F1, PC-SF1, PC-RF1, PC-AF1

Part # PC-SM2

NEW Panel Clip - surface mount male Heavy duty (black) Adhesive fix super-groove base, heavy duty (black). Fits into PC-F1, PC-SF1, PC-RF1, PC-AF1 Heavy duty

Part # PC-SM2H

Panel Clip - self tapping female Mounts into 16.8mm hole drill with CT-07, CT-13. Install with CT-03 Compatible with male clips, PC-M1, PC-M1A, PC-M2H, PC-SM2, VS-M1

Part # PC-F1

Panel Clip - surface mount female Screw fix, see product sheet. Compatible with PC-M1A, PC-M2H, PC-SM2, VS-M1

Part # PC-SF1

Panel Clip - side mount female Brown Screw fixed to side of decks heads (use CT-18 install jig), for ceiling application. Suitable for other applications such as floor panels & cabinets. Compatible with male clips, PC-M1A, PC-M2H, PC-SM2 & VS-M1

Part # PC-RF1-B

Panel Clip - Auto Fit Female clip with lateral adjustment push fits into pre drilled hole in deck head frame (grounds). Fits all standard male clip halves. PC-M1A, PC-M2H, PC-SM2, PC-SM2H, VS-M1

Part # PC-AF1

Center Point Insert - red plastic large Use to align holes in panel and frame when using blind holes in panel. Fits 10mm blind hole in panel (drilled with CT-09) or into PC-F1, PC-SF1, PC-RF1 & PC-AF1. Refer install guide. Updates existing CP-01, used for all centre points & centering PC-AF1

Part # CP-01A

NEW SG Clip Center Point Insert Use to align SG clips in panel and frame when screw fixing

Part # CP-03

Drill 10mm with shoulder For drilling through panel & pilot hole for CT-07

Part # CT-01

Install tool for PC-F1 For installation of self tapping female PC-F1, using battery drill with correct torque setting

Part # CT-03

Panel Removal Tool Stainless steel tool for removing covered (upholstered) panels. Do not use with painted panels

Part # CT-05

Panel removal tool painted panel (glass sucker 40kg) Panel removal & handling, using a glass suction cup for painted & pre finished panels. Always use 2 glass suckers to control panel removal.

Part # CT-17

Step Drill (tungsten) 16.8mm tungsten tipped for PC-F1, used to drill out 10mm hole in frame. See install guides & video for correct use

Part # CT-07

Panel drill 10mm forstner type To drill blind holes in the back of painted panels. Use with CP-01. See install guides & video

Part # CT-09

UPDATED Install tool for PC-M1A, PC-M2H, VS-M1, Panelsafe For installation of self tapping male PC-M1A, PC-M2H, VS-M1, & Panelsafe, using battery drill with correct torque setting Central hole changed from slot to round

Part # CT-10

Carbide tip drill - 16.8dia forstner type for PC-F1 To drill holes in fibreglass, carbon fibre and kevlar laminates, refer installation video currently out of stock

Part # CT-13

Tap for PC-F1 Tap tool for tapping thread to fit PC-F1 into fibre glass, aluminium, or similar. drill hole with CT-07 then tap.

Part # CT-15

Installation jig for PC-RF1 Drill guide for PC-RF1 mounting options

Part # CT-18

Yard kit 6 tools Installation tools CT-01, CT-03, CT-05, CT-07, CT-09, CT-10 in plastic box. CT-10 added, replaces CT-04 removed

Part # CT-08

Service kit For on-board maintenance. Includes PC-M1Ax40, PC-F1x10, PC-SM2x4, CT-03, CT-04, CT-05

Part # CT-06S

UPDATED Introductory Trial kit complete with clips & tools Includes PC-F1x12, PC-M1Ax12, PC-SM2x4, PC-SF1x4, CP-01Ax4, CT-01, CT-03, CT-05, CT-07, CT-09, CT-10. Product information & CD with Installation videos. Includes 1 each PC-RF1, PC-M2H, PC-SM2H, VS-M1

Part # CT-06T

Trial Pack Vario clips Vario self tapping male clip for variable gap and shear load strength, Plus free PC-M2H Heavy Duty male clips. (VS-M1x10, PC-F1x20 plus CT-10 install tool & FREE PC-M2Hx10)

Part # CT-11T

Trial Pack Heavy Duty Clips Heavy duty self tapping male clips for exterior & heavy panels. Plus FREE Vario Clips for variable gap and shear load strength. (PC-M2Hx10, PC-F1x20 plus CT-10 install tool & FREE VS-M1x10)

Part # CT-12T

Trial kit SG Interlocking disc set Surface mounted interlocking disc set with super-groove technology for thin walled panels & wall panels (SG-F10x10 & SG-M10x10, wafer head screws x 10)

Part # CT-14T

Trial Pack Side mount female clips Screw fixed to side of decks heads, for ceiling application. Suitable for other applications such as floor panels & cabinets. Pack contains 10xPC-RF1, 4xCP-01A, (1x PC-M1A, PC-M2H, PC-SM2 & VS-M1) & product information sheets

Part # CT-16T

A5 panel sample with CD Pre finished/paint finish panel Demonstrates PC-F1, PC-M1, PC-M2H, PC-SM2, VS-M1 clips standard range clips. includes CD ROM with product information & installation videos.

Part # CD-03

PanelSafe 150mm PanelSafe restraint secures panel from falling by suspending panel on removable stainless steel wire strops. Use with fastmount system clips, install with CT-07, CT-03, CT-10. Standard drop length 150mm, custom lengths available on request.

Part # PS-150

PanelSafe custom length PanelSafe restraint secures panel from falling by suspending panel on removable stainless steel wire strops. Use with fastmount system clips, install with CT-07, CT-03, CT-10. Custom lengths from 50mm to 500mm, minimum order 50no.

Part # PS-custom

NEW Low Profile clip - self tapping female Screws into plywood & MDF type boards with 25 to 25.4mm hole with CT-19 install tool. Use with LP-M8 & LP-SM8 male clips Award winner BUILDNZ 2011

Part # LP-F8

NEW Low Profile clip - Drywall self tapping female Screws into 25.4mm hole into Drywall plasterboard with CT-19 install tool, in battery drill with correct clutch setting. Use with LP-M8 & LP-SM8 male clip For the Architectural sector. Award winner BUILDNZ 2011

Part # LP-DF8

NEW Low Profile clip - self tapping male Screws into plywood & mdf type boards with 10mm hole, drill with CT-09 & install with CT-10 install tool. Use with LP-F8 & LP-DF8 female clips Award winner BUILDNZ 2011

Part # LP-M8

NEW Low Profile clip -surface mount male Adhesive fix super groove base onto panel or frame. Can also be screw fixed with #6 gauge self tapping screw Use with LP-F8 or LP-DF8 female Low Profile clips Award winner BUILDNZ 2011

Part # LP-SM8

NEW Low Profile Auto fit female Female clip with lateral adjustment push fits into pre drilled hole in deck head frame (grounds). Fits all Low Profile male clip halves. Designed for use with curved panels

Part # LP-AF8

Center Point for Low Profile series clips Use to align holes in panel and frame when using blind holes in panel. Fits 10mm blind hole in panel or into the LP-F8 & LP-DF8 female clip

Part # CP-08

SG interlocking disc female Surface mounted interlocking disc (female) with super-groove technology, 3kg pull out load, use with SG-M10

Part # SG-F10

SG interlocking disc male Surface mounted interlocking disc (male) with super-groove technology, 3kg pull out load, use with SG-F10

Part # SG-M10