Drainage | Winstone Aggregates

By: Winstone Aggregates  06-Dec-2011
Keywords: Production Process, Drainage Applications

Manufactured and natural aggregates are produced from scoria, sand and crushed metal for specified and non-specified drainage and filter applications. Customer tailored mixes are available by request.

Products: PAPs, GAPs, Filter F2, Sands, Scoria

Winstone Aggregates adheres to strict quality control standards. Our production process is closely monitored to control size proportions and avoid segregation.

Drainage filter material

Filter F2 Sand (sand mixed with 20mm crushed aggregate) is produced for sand bed filter applications.

Drainage metal 7mm to 40/20

For backfills, soakage trenches and general drainage applications.

Pipe bedding

Crusher fines and PAPs are produced for pipe bedding application. For large pipes, GAP 20 is available.


A variety of sands are available for use in drainage applications. Iron sand is available on request.

Scoria SAP 7 – SAP 50

Porous, lightweight and with a high strength to weight ratio, SAP products are manufactured for backfills, soakage trenches and general drainage applications.

Keywords: Drainage Applications, Production Process,

Other products and services from Winstone Aggregates


Erosion Control | Winstone Aggregates

Gaps between the large grade rocks trap and slow the flow of water, reducing its erosion ability. Rip Rap absorbs and deflects the impact of waves before they reach the structure they protect. Protects coastlines and structures from water erosion withlarge grade rock. Rip Rap is available in a range of sizes.


Roading Aggregates | Winstone Aggregates

Winstone Aggregates produces NZTA compliant basecourse for use on state highways and other heavily trafficked areas. A range of high quality sealing chip from Grade 2 to Grade 6 is produced to meet NZTA specifications.


Sand & Pumice | Winstone Aggregates

Winstone Aggregates produces a variety of sands for horse arenas, golf courses, landscaping, drainage applications, and concrete and mortar manufacture. For concrete production, a variety of manufactured, alluvial and marine sands that meet national specification standards are available. F2 Filter Sand (sand mixed with 20mm crushed aggregate) is produced for drainage application.


Products | Winstone Aggregates

Data retrieved from 50 years of geological information and site research means that Winstone Aggregates can forecast and schedule supply in excess of 30 years. We are able to test and monitor product so that any significant variances are addressed within 24 hours. Current figures show that the demand for aggregate equates to eight tonnes for every person annually. We are constantly challenged to minimise variances in product.


Cement Treated Basecourse | Winstone Aggregates

Laboratory testing using repeated load triaxial testing equipment has found that low dosages of cement added to basecourse significantly improves the moisture resistance and stiffness resulting in greater resistance to deformation when wet. Plant stabilising improves the accuracy of the production process allowing for a greater controlled and consistent finished product.


Concrete & Asphalt Aggregates | Winstone Aggregates

From uniformly graded coarse aggregates through to a variety of manufactured, alluvial and marine sands, all products are produced to meet national concrete aggregate specifications. Winstone Aggregates produces a range of coarse and fine aggregates that meet specification for use in asphalt manufacture. Winstone Aggregates produces a range concreteand asphalt aggregates. For concrete requiring good strength and stiffness.