Trolleys - Clamp System - Planhorse Products

By: Planhorse Systems  06-Dec-2011
Keywords: Drawings, Sheets, Filing

Trolleys

The solution to vertical filing of drawings and plans.


The front loading Mobile Trolleys occupy a very small space whilst storing up to 2000 drawings, plans or large sheets. The Trolley provides high density vertical storage for large quantities of sheets. Sheets are grouped together in a clamp which hangs on the Trolley. Each clamp holds from 1 to 100 sheets. Sheets are instantly accessed and easily filed.

The front access Trolley comes in 3 sizes. The AO, A1 and the CadMobile which is designed to carry A2 and A3 or smaller sheets on 2 levels.


 


Models

The AO & A1 trolleys come in 2 models - The

1000 model carries 1000 sheets on 10 clamps. The 2000 Model carries 2000 sheets on 20 clamps.  The 2000 Model Trolley is twice as wide as the 1000 Model. Cad Mobiles

carry A1 & A2 clamps on 2 levels - maximum sheet size A1 or smaller. A1 sheets are hung from their long side. A2 and smaller sheets are hung from the short side. CadMobiles come in 2 models - the 2000 Model carries 2000 sheets and the 4000 Model 4000 sheets. Leading the way in filing smaller sheets the Cad Mobile enables up to 4000 sheets to be moved easily. They are space saving, economical and aesthetically pleasing.

Manufactured and tested to the highest quality standards the robust Trolleys are non obtrusive and enable a dramatic reduction in storage and retrieval time. Sheets can be logically organised and easily accessed while Planhorse saves 90% of the floor space needed by other systems.

The strength inherent in the design and construction of the Trolleys and their high quality industrial castors make them easy to move even when fully laden.

Trolleys carry a

5 year replacement guarantee

when used to carry Planhorse clamps.                                                              



Key Features:


  • Front loading and fully mobile. Castors can be easily removed to turn Trolleys into fixed stands.
  • Are supplied in flat pack CKD format ready to assemble. Assembly instructions and all hardware/parts are included.
  • Manufactured of powder coated 38.6mm robust tubular steel in black they complement the white clamps.
  • Cadmobiles hanging modules are of 3mm flat steel powder coated white whilst castors are heavy duty in black.
  • Provide lower cost per sheet filing than any other form of filing.
  • Are built for the rigours of construction sites yet are equally at home in architectural and design offices.
  • Front loading the mobile trolleys eliminate the frustrations inherent in filing drawers, prong cabinets and drop lift systems.
  • Hanging and removing clamps is quick and simple. From the front of the Trolley tilt the clamp slightly, clip it onto the Hanging Module then straighten so that the red stop keeps the clamp securely fitted. Reverse the procedure when removing.
  • No annoying swing brackets or end supports to contend with.
  • Mobiles carry a 5 year Replacement Guarantee.


Specifications:



Model Size Width Height Trolley Capacity Packing Weight Volume
  mm Inch mm Inch Clamps Sheets Cartons Kgs Lbs cbm
A1 1000 405 16" 1070 42" 10 x A1 or A2 Clamps 1000 1 11.4 25 .056
AO 1000 405 16" 1330 52" 10 x AO or smaller 1000 1 14.2 31 .076
A1 2000 655 26" 1070 42" 20 x A1 or A2 Clamps 2000 1 13.5 30 .056
AO 2000 655 26" 1330 52" 20 x AO or smaller clamps 2000 1 16.5 36 .076
Cadmobile 2000 405 16" 1270 50" 20 x A1 or A2 Clamps 2000 1 18.3 40 .076
Cadmobile 4000 655 26" 1270 50" 40 x A1 or A2 Clamps 4000 1 22.0 48 .076


PLANHORSE IS THE DRAWING AND PLANFILING SOLUTION

Keywords: Drawings, Filing, Powder Coated, Sheets, Vertical Filing

Contact Planhorse Systems

Email

Print this page

Other products and services from Planhorse Systems

06-Dec-2011

Category Listing

To hang or remove a clamp simply tilt the clamp forward slightly clip it onto the hanging module then straighten so the end stop keeps the clamp firmly attached to Trolley or Wallrack. This vertical fully mobile system replaces the original flat horizontal drawer, the machines that folded down to A4 size the pigeon holes and the prong cabinet methods.


06-Dec-2011

Wallracks - Clamp System - Planhorse Products

Well organised in required order groups of plans can be accessed and stored quite simply. Overlong sheets are easily hung by mounting the Wallrack higher up the wall than normal. Freeing up valuable floor space makes them the ideal answer when space is limited. Wallracks hold clamps of any length or a combination of various lengths. Drawings are filed flat with no creasing, tearing, crimping or folding.


06-Dec-2011

Planhorse Products - Planhorse Systems Limited

To hang or remove a clamp simply tilt the clamp forward slightly clip it onto the hanging module then straighten so the end stop keeps the clamp firmly attached to Trolley or Wallrack. This vertical fully mobile system replaces the original flat horizontal drawer, the machines that fold down to A4 size, the pigeon holes and the prong cabinet methods.


06-Dec-2011

Plan Clamps, Plan Storage

The Clamp System was designed specifically for filing and storing Architectural Plans, Construction Drawings, Blueprints, Engineering Drawings, Charts, Maps, Art Graphics, Posters and other oversize sheets of paper. Clamps or binders are the simplest and cheapest way of hanging large sheets in an orderly way. Continuous even grip over the length of the clamp produces maximuim hold. Clamps hold up to 12 Kgs (26 Lbs) of sheets in each clamp.