Plan Clamps, Plan Storage

By: Planhorse Systems  06-Dec-2011
Keywords: Drawings, Sheets, Powder Coated



The Clamp System was designed specifically for filing and storing Architectural Plans, Construction Drawings, Blueprints, Engineering Drawings, Charts, Maps, Art Graphics, Posters and other oversize sheets of paper.  The Clamp is fully portable.


Key Features:

  • Clamps or binders are the simplest and cheapest way of hanging large sheets in an orderly way.  Sheets are hung vertically.
  • Each clamp carries from 1 to 100 sheets with equally strong grip. 
  • Lightweight and fully portable, the clamp is made of extra strength extruded aluminium.
  • Ideal for site work and frequently accessed plans/drawings an entire project can be carried in one clamp.  Groups of drawings/sheets are organised and clamped in an orderly manner.
  • No more - Rolling, Folding up, Disorganisation or damage to drawings.  No crimping, slippage or creasing occurs to the contents.
  • The handle makes carrying easy.  Rounded corners eliminates scratching desks or tables.
  • Clamps hang in Mobile Trolleys or on Wallracks.
  • Clamps carry a 10 year replacement Guarantee when used for the purpose intended - holding drawings and large format paper.
  • Clamps are made of scratch resistent powder coated industrial strength extruded aluminium
  • Clamps come in 4 sizes AO, B1, A1 & A2 - see Specifications.
  • Clamp design eliminates slippage.  Continuous even grip over the length of the clamp produces maximuim hold.
  • Clamps are springloaded, store sheets flat, do not crimp, fold, tear or crease the sheets.
  • Clamps are simple to use - loosen wingnuts slide sheets in or out then re tighten finger tight.
  • Contents of clamps can be used like pages of a book. Sheets held securely in proper sequence for easy reference and storage.
  • Clamps hold up to 12 Kgs (26 Lbs) of sheets in each clamp.
  • Colour - White / Zinc Handle - Black / Nickel Wingnuts - Black / Extra strong grip hanging clip and stop - Red made of industrial strength Nylon fully guaranteed.  Sold in cartons of 5 clamps of the same size.


PLANHORSE IS THE DRAWING AND PLANFILING SOLUTION

Specifications:

Model Size Length Height
Hold Sheet Sizes up to
Capacity Sheets Packing Units / Cartons Weight Volume
  mm Inch mm Inch mm Inch   Clamps Kgs Lbs cbm
AO 914 36" 65 2.5" 841 x 1189 36" x 48" 100 5 3.30 7.25 .007
B1 841 33" 65 2.5" 760 x 1020 30" x 40" 100 5 3.10 6.80 .007
A1 650 25.5" 65 2.5" 594 x 841 24" x 36" 100 5 2.50 5.50 .005
A2 460 18" 65 2.5" 420 x 594 18" x 24" 100 5 1.75 3.75 .005

Keywords: Clamp System, Drawings, Powder Coated, Sheets,

Contact Planhorse Systems

Email

Print this page

Other products and services from Planhorse Systems

06-Dec-2011

Category Listing

To hang or remove a clamp simply tilt the clamp forward slightly clip it onto the hanging module then straighten so the end stop keeps the clamp firmly attached to Trolley or Wallrack. This vertical fully mobile system replaces the original flat horizontal drawer, the machines that folded down to A4 size the pigeon holes and the prong cabinet methods.


06-Dec-2011

Trolleys - Clamp System - Planhorse Products

The strength inherent in the design and construction of the Trolleys and their high quality industrial castors make them easy to move even when fully laden. The front loading Mobile Trolleys occupy a very small space whilst storing up to 2000 drawings, plans or large sheets. Cadmobiles hanging modules are of 3mm flat steel powder coated white whilst castors are heavy duty in black.


06-Dec-2011

Wallracks - Clamp System - Planhorse Products

Well organised in required order groups of plans can be accessed and stored quite simply. Overlong sheets are easily hung by mounting the Wallrack higher up the wall than normal. Freeing up valuable floor space makes them the ideal answer when space is limited. Wallracks hold clamps of any length or a combination of various lengths. Drawings are filed flat with no creasing, tearing, crimping or folding.


06-Dec-2011

Planhorse Products - Planhorse Systems Limited

To hang or remove a clamp simply tilt the clamp forward slightly clip it onto the hanging module then straighten so the end stop keeps the clamp firmly attached to Trolley or Wallrack. This vertical fully mobile system replaces the original flat horizontal drawer, the machines that fold down to A4 size, the pigeon holes and the prong cabinet methods.