Servo amplifier PMCprotego D

By: Pilz  06-Dec-2011

Servo amplifiers PMCprotego D are used as drive controllers for the widest range of motor technologies. The new, higher performance version of the PMCprotego D has a higher safety classification: even the basic version contains the "safe torque off" function in accordance with PL e of EN ISO 13849-1, SIL CL 3 of IEC 62061 and up to Cat. 3 of 954-1.

A special slot for the optional safety cards is already integrated, so servo amplifiers PMCprotego D are ready to be upgraded with additional safety functions such as safely reduced speed, safe operational stop or safe standstill.

Your benefits at a glance:

  • Greater availability of your plant or machine thanks to "safe torque off" and other drive-integrated safety functions
  • Optimum process quality thanks to the high quality of control
  • Cost savings due to high overload capability and fewer sizes
  • Easy to incorporate into your machine concept thanks to an open hardware and software architecture
  • Quick and easy to learn how to use, plus clear project documentation thanks to user-friendly, understandable user and parameter software
  • Units can be exchanged quickly thanks to the SD memory card


Other products and services from Pilz

06-Dec-2011

Fieldbus modules available

Worldwide safety standard for all machine types PNOZmulti Mini: Irrespective of the standard control system, you will always have a one-stop safety solution, which can easily be adapted to changing requirements. Parallel use with a fieldbus module Another new feature is the ability to use either the communication module PNOZ mmc1p ETH or PNOZ mmc2p serially in parallel with a fieldbus module.


06-Dec-2011

Human Machine Interface with PMI

As plant and machine operators, diagnostic units PMImicro diag in conjunction with Pilz control systems will give you a system that enables rapid troubleshooting when production faults occur. As a complete diagnostic solution, PMImicro diag provides the full diagnostic functionality of the diagnostic concept PVIS. Diagnostic messages are displayed on a high-quality.


06-Dec-2011

Just Three Months before

Proactively beginning with risk assessmentMachine builders and users, who until now, relied on EN 954-1 will be forced to reevaluate their existing safety systems and policies. Doing so proactively beginning with risk assessment, they will yield benefits relating to risk reduction and more intelligent solutions for machinery safety.


06-Dec-2011

October's sensor of the month: Coded safety switch PSENcode

As a result, it is impossible to manipulate the switch: The highest level of protection can be achieved in the smallest space for applications up to PL e of EN ISO 3849-1 or SIL 3 of EN/IEC 62061, as well as providing high availability for your plant. Integrated evaluation also enables the PSENcode to be connected in series to other sensors, without compromising the safety classification; it also saves on safe inputs on the evaluation device.


06-Dec-2011

Safe control solution for stage technology

The total solution (PSSuniversal PLC, standard rotary encoder PSENenco and PAS4000 software blocks) is standard-compliant in accordance with SIL CL 3 and PL e. The control system PSSuniversal PLC and the new dual-channel standard rotary encoder PSENenco are used for this purpose. Stage hoist applications can be safely monitored in the automation system PSS 4000. It's essential to monitor stage elements that are constantly in motion.