Human Machine Interface with PMI

By: Pilz  06-Dec-2011
Keywords: Control Systems

As plant and machine operators, diagnostic units PMImicro diag in conjunction with Pilz control systems will give you a system that enables rapid troubleshooting when production faults occur. Error messages from PSS, SafetyBUS p and PNOZmulti are displayed along with positive suggestions for how to rectify the fault. As a complete diagnostic solution, PMImicro diag provides the full diagnostic functionality of the diagnostic concept PVIS. As a plant operator, no programming skills are required. PMImicro diag will provide advice on how to get the machine operating again quickly. No need for time-consuming troubleshooting, the right solution is ready and waiting on the machine. The diagnostic device PMImicro diag saves around 50 % of the time needed to rectify the error!


Your benefits at a glance

  • Higher performance thanks to enhanced processors: RISC 1 GHz OMAP
  • Rapid configuration thanks to pre-configured system messages
  • Plant and machinery can be restarted quickly
  • With Ethernet and serial interface
  • Diagnostic messages are displayed on a high-quality, colour TFT display
  • Quality product from Germany

Keywords: Control Systems

Other products and services from Pilz

06-Dec-2011

Servo amplifier PMCprotego D

The new, higher performance version of the PMCprotego D has a higher safety classification: even the basic version contains the "safe torque off" function in accordance with PL e of EN ISO 13849-1, SIL CL 3 of IEC 62061 and up to Cat.


06-Dec-2011

Fieldbus modules available

Worldwide safety standard for all machine types PNOZmulti Mini: Irrespective of the standard control system, you will always have a one-stop safety solution, which can easily be adapted to changing requirements. Parallel use with a fieldbus module Another new feature is the ability to use either the communication module PNOZ mmc1p ETH or PNOZ mmc2p serially in parallel with a fieldbus module.


06-Dec-2011

Just Three Months before

Proactively beginning with risk assessmentMachine builders and users, who until now, relied on EN 954-1 will be forced to reevaluate their existing safety systems and policies. Doing so proactively beginning with risk assessment, they will yield benefits relating to risk reduction and more intelligent solutions for machinery safety.


06-Dec-2011

October's sensor of the month: Coded safety switch PSENcode

As a result, it is impossible to manipulate the switch: The highest level of protection can be achieved in the smallest space for applications up to PL e of EN ISO 3849-1 or SIL 3 of EN/IEC 62061, as well as providing high availability for your plant. Integrated evaluation also enables the PSENcode to be connected in series to other sensors, without compromising the safety classification; it also saves on safe inputs on the evaluation device.


06-Dec-2011

Safe control solution for stage technology

The total solution (PSSuniversal PLC, standard rotary encoder PSENenco and PAS4000 software blocks) is standard-compliant in accordance with SIL CL 3 and PL e. The control system PSSuniversal PLC and the new dual-channel standard rotary encoder PSENenco are used for this purpose. Stage hoist applications can be safely monitored in the automation system PSS 4000. It's essential to monitor stage elements that are constantly in motion.