Fieldbus modules available

By: Pilz  06-Dec-2011
Keywords: Operator Terminals

Modular, expandable base units PNOZ mm0.1p and PNOZ mm0.2p have now been enhanced. New fieldbus modules are also now available alongside the communication and safe link modules. As a result, the base units can be expanded on the left-hand side and can be connected to the fieldbus systems PROFIBUS-DP and CANopen. Other fieldbus modules are in preparation.

Now possible in serial: Parallel use with a fieldbus module

Another new feature is the ability to use either the communication module PNOZ mmc1p ETH or PNOZ mmc2p serially in parallel with a fieldbus module. You can configure the fieldbus inputs and outputs along with the fieldbus modules in the software tool PNOZmulti Configurator. The fieldbus modules are used to read the diagnostic data and to set virtual inputs/outputs for standard functions.

Your benefits at a glance

  • User-friendly diagnostic and control information guarantees short downtimes and high plant availability
  • Two-way signalling and control via fieldbus modules
  • Simple and economical to expand by selecting compatible modules
  • Connect the operator terminals PMImicro diag for an overall, integrated diagnostic solution

Worldwide safety standard for all machine types

PNOZmulti Mini: Irrespective of the standard control system, you will always have a one-stop safety solution, which can easily be adapted to changing requirements.

Further information:

Keywords: Operator Terminals

Other products and services from Pilz

06-Dec-2011

Servo amplifier PMCprotego D

The new, higher performance version of the PMCprotego D has a higher safety classification: even the basic version contains the "safe torque off" function in accordance with PL e of EN ISO 13849-1, SIL CL 3 of IEC 62061 and up to Cat.


06-Dec-2011

Human Machine Interface with PMI

As plant and machine operators, diagnostic units PMImicro diag in conjunction with Pilz control systems will give you a system that enables rapid troubleshooting when production faults occur. As a complete diagnostic solution, PMImicro diag provides the full diagnostic functionality of the diagnostic concept PVIS. Diagnostic messages are displayed on a high-quality.


06-Dec-2011

Just Three Months before

Proactively beginning with risk assessmentMachine builders and users, who until now, relied on EN 954-1 will be forced to reevaluate their existing safety systems and policies. Doing so proactively beginning with risk assessment, they will yield benefits relating to risk reduction and more intelligent solutions for machinery safety.


06-Dec-2011

October's sensor of the month: Coded safety switch PSENcode

As a result, it is impossible to manipulate the switch: The highest level of protection can be achieved in the smallest space for applications up to PL e of EN ISO 3849-1 or SIL 3 of EN/IEC 62061, as well as providing high availability for your plant. Integrated evaluation also enables the PSENcode to be connected in series to other sensors, without compromising the safety classification; it also saves on safe inputs on the evaluation device.


06-Dec-2011

Safe control solution for stage technology

The total solution (PSSuniversal PLC, standard rotary encoder PSENenco and PAS4000 software blocks) is standard-compliant in accordance with SIL CL 3 and PL e. The control system PSSuniversal PLC and the new dual-channel standard rotary encoder PSENenco are used for this purpose. Stage hoist applications can be safely monitored in the automation system PSS 4000. It's essential to monitor stage elements that are constantly in motion.