Nuralite Nuraply 3P waterproofing system is a tough, reinforced bituminous waterproofing membrane, of great strength, suitable for maintenance foot traffic and finished in any selected colour using Nuracolour coating system.
The Nuralite Nuraply 3P waterproofing membrane layers are 3mm thick of APP bitumen with a heavy reinforcing layer of non-woven polyester inside.
The first layer consists of 10m x 1m rolls of Nuralite Nurabasesheet which are laid by cold gluing with heat welded lap-joints. The capsheet is torch-on applied to the base sheet to create a very robust, fully bonded membrane waterproofing system - ideal for flat roofs and decks protected with timber or tiles.
The installed Nuralite Nuraply 3P waterproofing membrane sandy surface is finished with either Nuracoat BAC (Bitumenious Aluminium Coating) or Nuracolour Gel, to provide protection, added strength and an attractive appearance.
The membrane is manufactured by ATAB of Belgium but has been specifically refined for New Zealand conditions. ATAB manufacture over 10 million square meters of membranes per annum.When to use
The inert dense Nuracolour surface of Nuralite Nuraply 3P waterproofing membrane is suitable for the catchment of drinking water.
BRANZ have appraised the Nuralite Nuraply 3P system as suitable for flat roofs and decks protected from foot traffic by installing tiles or timber decks on Nurajacks - New Zealand's only torch-on membrane with a complete deck appraisal.
NOTE: The BRANZ appraisal only covers a two layer Nuralite Nuraply 3P waterproofing system so in future we recommend only specifying Nuralite Nuraply 3P waterproofing as a two layer system.