Board and Batten Weatherboards - Cedar Cladding System

By: Jsc Timber  06-Dec-2011
Keywords: Stainless Steel, Architectural Profiles, Building Components

Board and Batten is a vertical design created using wide clear cedar boards spaced apart with narrow battens covering the joints, as per NZS E2/AS1 PROFILES to NZS 3617/BRANZ BULLETIN 411. There are no set limitations on widths and various combinations are used to create different looks with the most common being 6x1 and 8x1 Boards covered with 3x1 Battens. This can also be reversed with boards installed over Battens to create a deep negative channel effect.

Scope

        Residential and light Commercial cladding as per NZS 3604/E2AS1 direct and cavity fixing Ref: 
JSC/PBS Vent-Clad cavity system Test Report VM1/E2AS1

Design

        Producer Statement of Design Ref: Index JV-C and JV-RB

Profiles

        as per NZS 3617 or Branz Bulletin 411 
Standard profiles: J120, J121, J123

Architectural Profiles

        APJ900/APJ9001 Batten, APJ902 Batten, APJ903 Batten/ APJ904

Grades

        as per NZS 3631: 1988 
PC1 Premium Clears One 
PC2 Premium Clears Two

Durability

        as per NZS 3602 Class 2 durability for use above ground.
In long lengths to profile detailed with species and grading to the requirements of NZS 3602 but with 
all knots excluded.  To NZS 3602, table 2, Requirements for wood-based building components to 
achieve a 15-year durability performance.

Finish

        BSF (Band Sawn Face) or DF (Dressed Face).

Lenght Spread

        2400mm to 5900mm random, selected lengths available on request. No less than 2400mm.

Accessories

        90X19mm, 69X19mm external cover boards

        • Sharks Tooth Flashing
          PVC compressible flashing strip. For use with vertical Board & Batten in high wind applications.

Nails, Silicone Bronze

        Silicone Bronze fixings to NZBC E2/AS1 Table 24. JSC Rose Head Annular Groove Silicone 
Bronze Nails, Refer to JSC Timber for Manufacturer details / correct sizes and fixing details and 
options available.

Nails, 316 Stainless Steel

        Stainless Steel fixings to NZBC E2/AS1 Table 24. JSC Rose Head Annular Groove 316 Stainless 
Steel Nails, Refer to JSC Timber for Manufacturer correct sizes and fixing details and options 
available.

DuraCedar

Finishes: CedarShield - Factory Applied Weatherboard Coating System

        JSC specifically developed the Cedar Shield system to responsibly manage and increase the 
performance of Western Red Cedar against the harsh New Zealand environment.

        The CedarShield System offers factory applied coating within a controlled environment delivering a full 
envelope seal to Weatherboards, Fascia, Panelling and Dressed profiles prior to delivery.

        CedarShield insures a consistent application for improved appearance and increased finish life and 
durability without unsightly lap marks or acclimatisation lines.

        Coating options include both oil and water based coating systems with many new and innovative 
colours available.

Fixing Board & Batten

        Using full length Boards only, nail at the centre of the Board width (nogs – dwangs at 400 - 480 
mm centres).  Nail the Batten with a single fixing through the gap between boards at every fixing 
point.  Nails to be driven in with an upward slope.

Specification

        Masterspec section 4221J Western Red Cedar Cladding.

Keywords: Architectural Profiles, Building Components, Cavity System, Commercial Cladding, Silicone Bronze, Stainless Steel, Steel Fixings

Other products and services from Jsc Timber

06-Dec-2011

Vertical Shiplap Weatherboards - Cedar Cladding System

JSC Timber have been the first to develop a fully tested horizontal and vertical cavity system for Western Red Cedar in both Vertical Shiplap and Rusticated Cedar Weatherboards formats. JSC VertiClad is tested to NZBC E2/AS1 VM1 in respect to the requirements of clauses B1, B2 and E2 and gives a full Producer Statement-Design from an ACE accredited façade engineer.


06-Dec-2011

Rusticated Weatherboards - Cedar Cladding System

JSC Timber have been the first to develop a fully tested horizontal and vertical cavity system for Western Red Cedar in both Vertical Shiplap and Rusticated Cedar Weatherboards formats. JSC RusticClad is tested to NZBC E2/AS1 VM1 in respect to the requirements of clauses B1, B2 and E2 and gives a full Producer Statement-Design from an ACE accredited façade engineer.


06-Dec-2011

Cedar Weatherboards Cladding Solutions | JSC Timber

Cedar, with its distinctive golden brown growth rings, creates a “cathedral tracery” and vertical grained symmetry, that provides individual character and beauty to wall panelling, ceiling sarking, and internal beams. All producers are in the process or have achieved certification under one or more independent third party certification systems all programs have current and full up to date compliance to PEFC Annex 4 COC).


06-Dec-2011

Bevel Back Weatherboards - Cedar Cladding System

JSC specifically developed the CedarShield system to responsibly manage and increase the performance of Western Red Cedar against the harsh New Zealand environment. CedarShield ensures a consistent application for improved appearance and increased finish life and durability without unsightly lap marks or acclimatization lines.


06-Dec-2011

Splaycut Weatherboards - Cedar Cladding System

JSC specifically developed the CedarShield system to responsibly manage and increase the performance of Western Red Cedar against the harsh New Zealand environment. Offer variety and versatility that compliments any architectural style, a popular cladding option for gables and smaller impact areas that accentuate any façade.