Drymix Pave-Set for bricks and masonry pavers

By: Drymix Nz  06-Dec-2011

Drymix Pave-Set is a jointing material specially formulated to allow rapid filling of vertical joints between segmented clay and masonry pavers. For use on flexible pavements only with gaps up to 20mm.

Pave-Set has been specially formulated using graded, washed sand and additives to allow rapid filling of all vertical joints in segmental paving. Pave-Set is a jointing material which generally conforms to guidelines for jointing material set out by the Clay Brick and Pavers Institute's ‘Design Manual One' for Segmental Paving Units.

Drymix Pave-Set is suitable for use on driveways, footpaths, roadways and airport standing areas, sloping sites and in high wind areas. It is also suitable for areas where there is heavy traffic movement and where mobile vacuum sweepers are used.

Pave-Set is not recommended for use on rustic, non-smooth clay pavers as staining and scuffing may occur.

Sizes - 30kg


Other products and services from Drymix Nz

06-Dec-2011

Drymix Easy to Mix Concrete

Drymix Easy to Mix is a carefully proportioned blend of high quality materials including rounded river run sands and aggregates, Portland Cement and special concrete admixtures. After mixing with water, Easy to Mix is designed to produce a concrete mix that's easy to work with and provides excellent strength. The performance and convenience of Easy to Mix make it particularly suited for concrete jobs around the home and garden.


06-Dec-2011

Drymix Quick to Set fast setting concrete

Drymix Quick to Set concrete consists of a special blend of cement, graded dry quality sand and aggregates and selected additives. Quick to Set is not recommended for structural concretes or concretes requiring a smooth trowel finish. Drymix Quick to Set is an easy to use, fast-setting concrete ideal for the placement of posts. Quick to Set is ideal for applications involving placement of posts.


06-Dec-2011

Drymix DIY Mortar Portland Cement

Drymix Mortar's special blend of Portland cement, well-graded mortar sand and selected admixtures makes it particularly suited to the DIY user around the home. When combined with water, Mortar produces a high quality mortar with excellent handling and laying characteristics. It is ideally suited for use in all forms of masonry work including placement of bricks and blocks.


06-Dec-2011

Drymix Industry Mortar Portland Cement

Drymix Industry Mortar's special blend of Portland cement, well-graded mortar sand and selected admixtures makes it particularly suited to the DIY user around the home. When combined with water, Industry Mortar produces a high quality mortar with excellent handling and laying characteristics. It is ideally suited for use in all forms of masonry work including placement of bricks and blocks.


06-Dec-2011

Drymix Hi-Strength 36 Concrete

Drymix Hi-Strength 36 Concrete is for the projects where structural strength to 36MPa is required i.e. steps, slabs, driveways, footings, corner posts or any job specified for strength up to 36MPa. Hi-Strength 36 ready-to-use concrete is a carefully proportioned blend of high quality materials including rounded river run sands and aggregates, Portland cement and special concrete admixtures.


06-Dec-2011

Dyrmix pre mixed dry solid cement plaster

MCL Stucco Rite NZ 660 Cement Render is a factory pre-mixed dry render suitable for pumping and solid plastering of all brick, block, aerated concrete, concrete walls and StuccoMesh. This product can be used for thickness of between 5-100mm and is both a base and finish coat which can be applied using a mortar pump, a continuous mixer and by hand. A traditional solid plaster to be applied by accredited applicators by machine or hand.