Engineered Performance for Audi, VW, Porsche & Skoda
APR Presents Our 265HP 2.0T FSI Tuning Program for the VW Golf R
Volkswagen Automotive Group's 265HP 2.0T FSI is the world's premiere 4 cylinder turbocharged engine and APR has developed a line of premiere performance enhancements to compliment VAG's achievement. APR's expertly recalibrated engine management upgrades and professionally engineered OEM replacement performance engine components result in an even more enjoyable, powerful and efficient operation with no loss of life or use.
APR's Software, Electrical and Mechanical Engineering Teams have built upon years of experience and unmatched accomplishments with VAG's standard 200HP 2.0T FSI engine to develop new breakthroughs in drivability and performance enhancement for the 265HP 2.0T FSI. APR has been able to fully realize the upgrades VAG provided in increased engine durability, efficiency and performance to deliver a tuning program that is the culmination of 6 years of research and development and unparalleled in the performance aftermarket.
Stage I ECU Upgrade
Not only does our Stage I ECU Upgrade give you higher peak numbers of 239kw and 435nm. Gains of up to 49kw are available on 98 RON! APR's ECU Upgrade is the best power per dollar modification for the new 2.0T FSI and gives it just the extra edge these cars lack from the factory without pushing the limits. With factory like smoothness and drivability APR's ECU Upgrade will fill the void in an otherwise excellent car.
None to Meet Advertised Results Recommended Hardware:
Stage 2 ECU Upgrade
Recommended Hardware:* , ,
Stage II+ ECU Upgrade Required Hardware:
, Recommended Hardware:
Stage III ECU Upgrade
, Recommended Hardware:
, * Where Applicable
EMCS is APR's revolutionary patented Enhanced Modular Chipping System. EMCS is an industry leading technology that brings many new features to the automotive enthusiast. This technology was developed exclusively by Audi Performance & Racing, LLC and demonstrates APR's continued commitment to lead the industry with the most technologically advanced products available.
Want chipped mode? Want to be able to switch back to your stock settings? Want a race mode to run 104 octane fuel at the track? How about a valet mode that limits power? EMCS is the lone technology on the market that can give you all of these options. No changing of the chip or ECU is required. These programs are available at the touch of a button.
Other companies have attempted to imitate EMCS with clumsy external switching devices that only replace portions of a "base" calibration. EMCS is still the only Bosch Motronic Engine Management System enhancement that gives the ECU the ability to completely rewrite the entire operating map data when selecting different programming options. This allows for completely new and independent calibrations for each program selected giving you the best, most powerful and complete Stock Modes, 95, 98 and 104 (RON) octane Performance Modes and Valet Modes.
APR's EMCS features and program modes are activated via your OEM cruise control buttons for ease of use and stealth. Your cruise control will continue to function as normal, but will give you the ability to scroll through the programs you have purchased with your APR ECU Upgrade. The procedure is simple and involves only two steps.
How EMCS Works
Press and hold the "set" button on your cruise control. After approximately five seconds, the "check engine" light on your dash will begin to blink once per second. This will tell you that you are activating program one. This blinking sequence will continue for approximately five seconds. After this five second interval, the "check engine" light will begin blinking twice per second. This will indicate that you have activated the second program. This process is continued to access any remaining programs you may have purchased. (three blinks = program three, four blinks = program four).
Once you have activated the desired program, simply release the "set" button. The "check engine" light will stop flashing. Turn the ignition key off for 10 seconds, turn the key back on, and you will be locked in that program until you change it again. It's that simple.
APR's EMCS is a truly modular system that allows for future enhancements and features to be added as they are developed without the need for additional hardware. EMCS makes the following advanced features possible:
- Program Switching Enables you to swap between two or more engine programs using the cruise control stalk. All cars have stock and standard chipped program versions available. Valet, race-gas, and other specialty programs are available for most models.
- Fault Code Erase/Throttle Body Alignment (FCE/TBA) Fault Code Erase allows you to erase and reset engine related trouble codes without having to use a specialty tool. Throttle Body Alignment allows you to manually perform throttle-body adaptation.
- Security Lockout Prevents unauthorized personnel from accessing EMCS functions. The user may select any 2 to 4 digit security code. The security code is entered using the cruise control buttons.
APR's ECU Upgrades are installed by APR's aurhorised dealer network. Most late model applications are available to be installed via DirectPort programming without removing your ECU or even opening the hood. DirectPort Programming is not available for all models and in these rare cases EMCS Modules are able to be soldered to the ECU. DirectPort Programming
DirectPort Programming is another industry first brought to you by APR. DirectPort Programming is also referred to as "flashing" the ECU with the new operating software contained in APR's ECU Upgrade. No more soldering additional hardware to expensive and delicate factory electronics. DirectPort Programming facilitates ease of installation and offers new features to give you even more flexibility with your OEM ECU. DirectPort Programming is only available by bringing your car to an
Note: Video is for demonstration purpose only. Individual models vary How to Purchase
You may visit any
for local installation generally while you wait.
Security, Warranty and Money Back Guarantee
All APR ECU Upgrades are fully encrypted to prevent theft of our valuable and proprietary coding information by lesser companies and to provide protection to our clients by keeping the upgrade undetectable to a dealership's VAG diagnostic tool.
All APR ECU Upgrades include a limited lifetime warranty against defects in the software and to provide free updates and reflashes as they become available. Installation may be additional and is not included in the warranty.
All APR ECU Upgrades offer a 7 day money back guarantee with no questions asked. If for any reason you are unhappy with your APR ECU Upgrade you may return the upgrade to your place of purchase for a full refund provided you are within a 7 day period from your time of initial purchase. Installation is not included in the guarantee and is at the discretion of the place of install.
|GOLF R APR ECU Upgrade (Single Program) || $1895 NZD |
for more details.