Bitumen Cutback - MC 70

By: Alrite Bitumen  05-Apr-2012

The cutback bitumen is homogeneous and will not foam (as observed visually) when heated to application temperature.

The various grades of cutback bitumen (medium curing type) conform to requirements prescribed below:
Grade: MC-70
MS159 : 1994 specification for cutback Bitumen for use in the Construction and/or maintenance of pavement (First Revision).

REQUIREMENTS for use in pavement construction and/or maintenance

Property Min Max Technically identical with
Kinemalic 1 viscosity at 60°C, eSt 70 140 ASTM D2170
Flash Point (Tage Open-Cup), °C 38 - ASTM D1310
Distillate test 2:
Distillate, percent by Volume of total Distillate to 360°C
To 190°C - 10 -
To 225°C 20 55 -
To 260°C 40 80 ASTM D402

Uses  - Priming of all non-bituminous road buses, provision of temporary surfaces (deviations)

Application Rate - From 0.6 litre per m² to 1.2 litre per m²

Spraying / Application Temperature - 60 - 80 °C

Conversion:

At application temperature
Kg to Litre : Divide by 0.0907 Kg to Litre 0.940
Litre to Kg : Divide by 0.0907 Litre to Kg 0.940

Cleaning of hands & tools - Use paraffin

PACKAGING

Grade A+, Grade A, Grade B and Grade C

  • BOX IN 200KG BOXES
  • CONTAINER - 18 to 24 TONNES
  • BULK - MINIMUM 2000 TONNES


Contact Alrite Bitumen

Email - none provided

Print this page