D12 Toxic / Combustible Gas Detector

By: Analytical Technology  06-Dec-2011
Keywords: Toxic Gas, Cast Aluminum, Gas Transmitter

ATIs D12 Toxic Gas Transmitter will accept up to 46 different sensors, greatly reducing the need for multiple transmitter models. The self-aligning sensor holder simply plugs in, with automatic sensor recognition and verification when contact is made.

For many toxic and combustible gases, ATI offers a unique sensor response testing system unmatched by any competitive transmitter. Even outdoors in high wind conditions, the Auto-Test system provides reliable response checks to insure system integrity.  Sensor response is verified with an actual gas sample, generated on demand.  Generators store run time information accessible to operators, and are automatically tested for compatibility with the installed sensor.

D12 transmitters provide useful features that simplify installation, operation, and maintenance. From clear menu-driven setup pages to large numerical display of gas values, you simply can’t find a more versatile transmitter.  Gas concentrations are displayed in large, easy to read numbers. The display also provides alarm indication and complete menus for setting up operating parameters.  Backlighting is available when operating in 3-wire mode.

Operating functions such as calibration, alarm setup, alarm reset, data view, and setup options are all available using a magnetic tool. It is not necessary to open the enclosure when making adjustments.

Transmitters are designed for operation in hazardous areas. The cast aluminum housing for the D12 transmitter is rated for Class 1, Division 1, Group B, C, D locations and is UL, FM, and CSA certified.

The transmitter is available with either HART™ or MODBUS™ protocol. The HART™ protocol supports the HART™ Universal and Common Practice Commands at 1200 baud using the Bell 202 FSK modem standard. The MODBUS™ protocol supports 9600 baud access to concentration and status information, and supports alarm setup and many other functions on either RS485 or RS232 (software selectable).

Keywords: Aluminum Housing, Cast Aluminum, Gas Transmitter, Response Testing, Toxic Gas, Toxic Gas Transmitter,

Contact Analytical Technology

Email

Print this page

Other products and services from Analytical Technology

06-Dec-2011

A14/A11 Stationary Gas Monitor

Receivers may be located up to 1000 feet from sensor/transmitters for remote indication, or can provide local control functions such as valve shutoff while transmitting a 4-20 mA signal to remote displays or data loggers. From chemical and petrochemical plants to food processors, the GasSens system can be applied to the simplest or most complex gas detection application.


06-Dec-2011

F12 Toxic Gas Transmitter

The MODBUS™ protocol supports 9600 baud access to concentration and status information, and supports alarm setup and many other functions on either RS485 or RS232. The HART™ protocol supports the HART™ Universal and Common Practice Commands at 1200 baud using the Bell 202 FSK modem standard. ATIs F12 Gas Transmitter is designed to measure toxic gas in hazardous locations requiring an Intrinsically Safe device.


06-Dec-2011

B12 2-Wire Modular Gas Detector

ATIs B12 2-Wire Modular Gas Detector is a flexible component system providing a variety of options to meet individual gas detection and alarm requirements. This system will provide direct digital display of gas concentration, plus 3 alarm setpoints, remote alarm reset input, and retransmitted 4-20 mA output.


06-Dec-2011

B14 Gas Alarm Module

ATI’s Series B14 Gas Alarm Module Receivers are compact electronic modules that provide local alarm, display, and signal retransmission functions for gas detection systems. They’re ideally suited for use with ATI’s Series A12 or B12 two-wire toxic gas transmitters, or Model A12-17 or B12-17 three-wire combustible gas transmitter. Each relay can be assigned to any setpoint to allow multiple alarm functions at a single alarm point.


06-Dec-2011

D12IR Infrared Gas Transmitter

The D12-IR utilizes a compact IR sensor in a corrosion resistant housing with sintered flame arrestor to meet hazardous area classification requirements, and is suitable for most plant environments. While catalytic LEL sensors offer reliable service, the presence of silicon vapors, hydrogen sulfide, and halogenated hydrocarbons can quickly degrade sensor performance.


06-Dec-2011

C16 Portable Gas Detector

ATIs Series C16 PortaSens II Portable Gas Leak Detector is a versatile tool for performing regular leak checks in gas storage areas, around process equipment and piping, or in confined spaces prior to entry. A unique feature of the C16 detector is its ability to measure a variety of different gases by simply inserting the appropriate sensor for that gas.