Stepper Standard Round Motor

By: Anaheim Automation  06-Dec-2011
Keywords: Stepper Motors, Stepper Motor, Anaheim Automation

Standard (Round) Stepper Motors

Anaheim Automation, Inc. provides a full line of Standard (Round-Bodied) Stepper Motors, sometimes referred to as "legacy products." These stepper motors are available in NEMA frame sizes 23, 34, and 42. Each standard stepper motor series has up to three stack lengths to cover a wide range of torque, ranging from 40 ounce-inches in the NEMA 23 series, to up to 1,575 ounce inches in the NEMA 42 stepper motor series. Standard Stepper Motors are available with a 1.8-degree step angle, typically with six or eight-lead configurations. Standard Stepper Motors are also available with conduit boxes (model dependent), special stepper motor windings and shaft modifications, as well as cable, connector, and encoder adders. Anaheim Automation can typically cross other stepper motor manufacturers, including stepper motors that other manufacturers consider "obsolete." With its Standard Stepper Motor product line, customers looking for "drop-in" replacements, will save time and money.

23D

Anaheim Automation's 23D Series Standard Stepper Motors are NEMA 23 frame, 4-phase hybrid, 1.8° motors. They are available in three stack lengths, with torque ratings from 53 to 210 ounce inches. Options include six or eight-lead wire configurations, single or double-ended shaft. Compatible with the Slosyn MO60 series.

34D

Anaheim Automation's 34D Series Standard Stepper Motors are NEMA 34 frame, 4-phase hybrid, 1.8° motors. They are available in three stack lengths, with torque ratings from 150 to 630 ounce inches. Options include six or eight-lead wire configurations, conduit box, single or double-ended shaft. Compatible with the Slosyn MO90 series.

42D

Anaheim Automation's 42D Series Standard Stepper Motors are NEMA 42 frame, 4-phase hybrid, 1.8° motors. They are available in two stack lengths, with torque ratings from 625 to 1,575 ounce inches, with a conduit box as standard. Options include six or eight-lead wire configurations, single or double-ended shaft. Compatible with the Slosyn MO111 series.

23W

Anaheim Automation's economical 23W Series Standard Stepper Motors are NEMA 23 frame, 4-phase hybrid, 1.8° motors. They are available in three stack lengths, with torque ratings from 40 to 174 ounce inches, with eight lead wires. Options include single or double-ended shaft.

34W

Anaheim Automation's economical 34W Series Standard Stepper Motors are NEMA 34 frame, 4-phase hybrid, 1.8° motors. They are available in three stack lengths, with torque ratings from 180 to 695 ounce inches, with eight lead wires. Options include single or double-ended shaft.

Keywords: Anaheim Automation, Conduit Boxes, Motor Product, Motor Windings, Stepper Motor, Stepper Motors,

Other products and services from Anaheim Automation

06-Dec-2011

Stepper Motors

For applications where the wiring from the stepper motors to the stepper drivers exceeds 25 feet, please contact the factory for instructions, as it is likely that transient voltage protection devices will be required. Protect drivers, controllers and stepper motors from environments that are corrosive, contain voltage spikes, or prevent good ventilation.


06-Dec-2011

Anaheim Automation DC Motor, and Planetary Gearbox Products

Up to Four Stack Lengths, Several Windings in Each Frame Size. Drop-In Replacement for Most Competitors, at Huge Savings. Sizes: NEMA 08, 11, 14, 15, 17, 23, 24, 34 and 42. Torque: 2.5 to 5,700 Ounce-Inches.


06-Dec-2011

Stepper Products

Users appreciate the ease-of-use of the matched components of the Stepper Motor Driver Packs and Integrated Motor/Driver/Controller units, while OEM customers appreciate the cost savings and flexibility of being able to purchase sub-assemblies, easily incorporating them into their own control panels or machinery.


06-Dec-2011

Stepper Square High Torque

These motors are 1.8° with four lead wires as standard, but are available in other step angles and wire configurations, as well as single and double-ended shaft models. Four, six and eight-lead configurations are standard for Anaheim Automation's stepper motor product line, and are model dependent. The 08Y High-Torque Stepper Motor series is offered in two stack versions, with torque peak torque from 2.5 to 4.2 ounce inches.


06-Dec-2011

Permanent Magnet (PM) Stepper Motors

Anaheim Automation's TSM Series is a broad line of Permanent Magnet DC Stepper Motors, available in many sizes ranging from 15mm to 57mm in diameter. These CE Certified motors come standard with 7.5 or 15° step angles, four or six-lead wire connection, offered in several current ratings. These miniature Permanent Magnet DC stepper motors measure 20mm in diameter and provide up to 1.111 ounce-inches of bipolar torque.


06-Dec-2011

IP65 Rated Sealed Stepper Motors

The IP65-Sealed Stepper Motor series is an excellent choice for lab automation, biotech, and semiconductor automation equipment, just to name a few. The economical 23Y65 Sealed Stepper Motor series is offered in three stack versions, with torque rated from 175 to 262 ounce inches. The 17L65 Sealed Stepper Motor series is offered in three stack versions, with torque rated from 38 to 83 ounce-inches.


06-Dec-2011

Stepper Gearmotors

Anaheim Automation's Permanent Magnet Stepper Motor with Integrated Gearboxes are PM Gearmotors that provide precise motion at a economical price. These gearmotors are offered in six sizes with torque ranges of 300 to 4,000 g-cm, or up to 1,250 ounce-inches. Customization is available to suit a customer's exact requirements.