IP65 Rated Sealed Stepper Motors

By: Anaheim Automation  06-Dec-2011
Keywords: Stepper Motors, Stepper Motor, Anaheim Automation

Anaheim Automation, Inc. provides a line of High-Torque Stepper Motors that are IP65 rated for harsh environments. These IP65-rated stepper motors meet the splash-proof requirements of most applications with humid or damp environments. Sealed shafts further protect the stepper motors, which allows for longer life cycles. These stepper motors are available in NEMA frame sizes 17 to 42, the smallest beginning with 38 ounce-inches of torque, to the largest with up to 5,700 ounce inches of torque! The IP65-Sealed Stepper Motor series is an excellent choice for lab automation, biotech, and semiconductor automation equipment, just to name a few. Special shaft modifications are available, as well as

,

and

, making Anaheim Automation's IP65 Sealed Stepper Motor line the most comprehensive from a single source. For higher IP ratings, contact us to discuss your requirements.

17L65

The 17L65 Sealed Stepper Motor series is offered in three stack versions, with torque rated from 38 to 83 ounce-inches. These high-torque motors are 1.8° step angle, available in several windings, with four lead wires as standard. Customization is available.

23Y65

The economical 23Y65 Sealed Stepper Motor series is offered in three stack versions, with torque rated from 175 to 262 ounce inches. These high-torque motors are 1.8° step angle, available in several windings, with four lead wires as standard. Customization is available.

23L65

The 23L65 Sealed Stepper Motor series is offered in four stack versions, with torque rated from 72 to 260 ounce-inches. These high-torque motors are 1.8° step angle, available in several windings, with four lead wires as standard. Customization is available.

34Y65

The economical 34Y65 Sealed Stepper Motor series is offered in four stack versions, with torque rated from 637 to 1,700 ounce-inches. These motors are 1.8°, equipped with a conduit box as standard. Customization is available.

34N65

The powerful 34N65 Sealed Stepper Motor series is offered in four stack versions, with torque rated from 650 to 2,180 ounce-inches. These motors are 1.8° with a conduit box as standard. Customization is available.

34K65

The 34K65 Sealed Stepper Motor series is the most powerful in the 34 frame size, and is offered in four stack versions, with torque rated from 800 to 2,725 ounce-inches. These motors are 1.8° with a conduit box as standard. Customization is available.

42Y65

The economical 42Y65 Sealed Stepper Motor series is offered in four stack versions, with torque rated from 1,625 to 4,036 ounce-inches. These motors are 1.8° with a conduit box as standard. Customization is available.

42N65

The powerful 42N65 Sealed Stepper Motor series is offered in four stack versions, with torque rated from 1,650 to 4,365 ounce-inches. These motors are 1.8° with a conduit box as standard. Customization is available.

42K65

The 42K65 Sealed Stepper Motor series is the most powerful in the NEMA 42 size. Offered in three stack versions, with torque rated from 2,135 to 5,700 ounce-inches, these motors are 1.8° with conduit boxes as standard. Customization is available.

Keywords: Anaheim Automation, Lead Wires, Stepper Motor, Stepper Motors,

Other products and services from Anaheim Automation

06-Dec-2011

Stepper Motors

For applications where the wiring from the stepper motors to the stepper drivers exceeds 25 feet, please contact the factory for instructions, as it is likely that transient voltage protection devices will be required. Protect drivers, controllers and stepper motors from environments that are corrosive, contain voltage spikes, or prevent good ventilation.


06-Dec-2011

Anaheim Automation DC Motor, and Planetary Gearbox Products

Up to Four Stack Lengths, Several Windings in Each Frame Size. Drop-In Replacement for Most Competitors, at Huge Savings. Sizes: NEMA 08, 11, 14, 15, 17, 23, 24, 34 and 42. Torque: 2.5 to 5,700 Ounce-Inches.


06-Dec-2011

Stepper Products

Users appreciate the ease-of-use of the matched components of the Stepper Motor Driver Packs and Integrated Motor/Driver/Controller units, while OEM customers appreciate the cost savings and flexibility of being able to purchase sub-assemblies, easily incorporating them into their own control panels or machinery.


06-Dec-2011

Stepper Square High Torque

These motors are 1.8° with four lead wires as standard, but are available in other step angles and wire configurations, as well as single and double-ended shaft models. Four, six and eight-lead configurations are standard for Anaheim Automation's stepper motor product line, and are model dependent. The 08Y High-Torque Stepper Motor series is offered in two stack versions, with torque peak torque from 2.5 to 4.2 ounce inches.


06-Dec-2011

Stepper Standard Round Motor

Each standard stepper motor series has up to three stack lengths to cover a wide range of torque, ranging from 40 ounce-inches in the NEMA 23 series, to up to 1,575 ounce inches in the NEMA 42 stepper motor series. Standard Stepper Motors are also available with conduit boxes, special stepper motor windings and shaft modifications, as well as cable, connector, and encoder adders.


06-Dec-2011

Permanent Magnet (PM) Stepper Motors

Anaheim Automation's TSM Series is a broad line of Permanent Magnet DC Stepper Motors, available in many sizes ranging from 15mm to 57mm in diameter. These CE Certified motors come standard with 7.5 or 15° step angles, four or six-lead wire connection, offered in several current ratings. These miniature Permanent Magnet DC stepper motors measure 20mm in diameter and provide up to 1.111 ounce-inches of bipolar torque.


06-Dec-2011

Stepper Gearmotors

Anaheim Automation's Permanent Magnet Stepper Motor with Integrated Gearboxes are PM Gearmotors that provide precise motion at a economical price. These gearmotors are offered in six sizes with torque ranges of 300 to 4,000 g-cm, or up to 1,250 ounce-inches. Customization is available to suit a customer's exact requirements.