ISSI adds 256Mb DDR2 SDRAM to portfolio, targeted for Automotive, Networking, Telecom, and Industrial Applications

By: Allyanz  05-Apr-2012

Integrated Silicon Solution, Inc. (Nasdaq: ISSI), a leader in advanced memory solutions, has added the 256Mb density to their family of DDR2 SDRAMs. This addition expands ISSI's DDR2 SDRAM family to include densities of 256Mb, 512Mb and 1Gb. This expansion of the DDR2 SDRAM product family adds to ISSI's already extensive offering of SDR, DDR and DDR2 SDRAMs.

The 256Mb density is offered as 8Mx32, 16Mx16 and 32Mx8, in BGA packages with speeds up to 400Mhz (DDR2-800), giving design engineers a lower density option when a 512Mb device is not required. These devices operate from a single supply voltage of 1.8V

DDR2 SDRAMs are used in a variety of applications including automotive telematics and infotainment, networking/telecom access nodes, VoIP, switches, routers, and packet optical transport, plus many industrial applications. These applications typically require long term production support, which ISSI specialise in.

Samples and volume production support for the 8Mx32, IS43DR32800A (Standard Page Size) and the IS43DR32801A (Reduced Page Size) are available now.

Samples of the 16Mx16, IS43DR16160A and 32Mx8, IS43DR83200B are available now with volume production support beginning in Q1 2011. Samples of automotive versions of the 8Mx32, IS46DR32801A and the 16Mx16, IS46DR16160A are also available now.

For more details or pricing regarding these 256M DDR2 SDRAM, or any other memory solutions from ISSI, please

.


Contact Allyanz

Email - none provided

Print this page

Other news and updates from Allyanz

05-Apr-2012

ZamLock Secure Flash Drive for rugged Industrial and Military Applications

While maintaining the unparallel hardware authentication and encryption standard in all Zamlock drives, the ruggedised Zamlock Pro is designed with the mobile workforce in mind. PIN-pad protection makes drive impervious to computer/Internet based hacking attempts since drive is not mounted until correct PIN is entered. ZamLock Pro the only secure memory storage device that balances security.


05-Apr-2012

LATTICE MachXO2 PLD FAMILY low density PLDs

MachXO2 ZE devices range from 256 to 7K look-up tables, operate off a nominal 1.2V power supply, and support system performance up to 60MHz. Which offers designers of low-density PLDs an unprecedented mix of low cost, low power and high system integration in a single device. Customers can start designing with MachXO2 devices today using Lattice Diamond.


05-Apr-2012

NEW PLATFORM MANAGER FROM LATTICE TRANSFORMS BOARD POWER AND DIGITAL MANAGEMENT

The power management section consists of a programmable threshold, precision differential input comparator block with an accuracy of 0.7%, a 48-macrocell CPLD, programmable hardware timers, a10-bit analog to digital converter and a trim block for the trimming and margining of supplies.


05-Apr-2012

MICREL CUTS POWER REQUIREMENT FOR ETHERNET CONNECTIVITY IN HALF

On-chip termination not only eliminates components, simplifies PCB design and reduces system BOM, but also improves overall signal integrity and EMI emissions. The solution is based on Micrel's enhanced mixed-signal design which enables power consumption to be reduced by half compared to the prior generation. These devices provide the MII or RMII interface to transmit and receive data over standard CAT-5 unshielded twisted pair cable or fiber.


05-Apr-2012

ISSI ANNOUNCES 64Mb and 32Mb Pseudo SRAMs

The CRAM 1.5 option adds the synchronous / burst interface mode, an on-die temperature sensor for temperature compensated refresh, fixed latency, and drive strength control for the outputs. These new devices add to the previously released 4Mb and 8Mb parts, and give the design engineer a wide range of densities from which to choose to best fit the application's requirements.