FLOORCOAT NEW ZEALAND - Coated Concrete

By: Floorcoat  06-Dec-2011

FLOORCOAT NEW ZEALAND - Coated Concrete

Coated or Sealed Concrete are top coats used to protect or beautify the concrete substrate

Depending on the types of coatings required there are small but important steps.

Types of coatings vary from sealers that sit in the surface of the concrete, special water proofing liquids thatĀ penetrate and solidify to top coating systems the bond to the surface of the concrete.

Each application requires the right product for the type of use it may be subjected to. Example, a floor needs to be sealed in an air craft hanger. Due to leaking chemicals it would require a chemical resistant epoxy, resin, aliphatic polyurea etc. The wrong product will brake down letting the chemicals migrate their way into the concrete substrate.


Contact Floorcoat

http://www.floorcoat.co.nz

Email - none provided

Print this page

Other products and services from Floorcoat

06-Dec-2011

FLOORCOAT NEW ZEALAND - Floor Sanding

Floor sanding is the process of sanding the top surface of the floor, be it timber, cork tiles, particle board or even parquet. If proper maintenance is not kept then these coatings will be compromised, this will lead to a re-sand of the entire floor. The areas where the large sanders cannot reach, such as edges, corners, and stairs, are sanded by an edger/hand tool.


06-Dec-2011

FLOORCOAT NEW ZEALAND - Gym or Hall Floor Sanding

We specialize in large floor areas with the fastest turn around time, making sure your facility is given back to you, ready to use or hire out, saving you time and money. We can easily have a 1200 SQ/Meter floor from start to finish, including line marking and coating done in 6-8 days with the latest basket ball court markings.


06-Dec-2011

FLOORCOAT NEW ZEALAND - Concrete Polishing

Concrete polished floors is the process in which concrete is ground to a desired look to expose very little stone to large amounts of stone. Then by use of special resin diamonds, the concrete is then polished to a fine glossy finished. There are now new full water proof polished systems available for your polished concrete. Polished concrete has excellent thermal qualities and is a very cost effective product.


06-Dec-2011

FLOORCOAT NEW ZEALAND - Concrete Grinding

The process in which we use concrete grinding machines - (be it hand held or massive 4 head planetary grinders) - for removal of concrete for shaping a foot path, preparation for tiles, grinding to expose stones etc. These shoes come in different density's for different grades of concrete from soft to hard, plus different corse, very similar to grades of sandpaper. Concrete grinding - Removal and shaping of concrete for varies reason.


06-Dec-2011

FLOORCOAT NEW ZEALAND - Staining

Staining is used to change the colour of either the concrete or the timber floor. This can be a full block out colour or it could be a tint. Here is an example of Rimu that has been darken. This insures a brighter, tighter cleaner look. Staining of the grain or the wood its self. Staining of wooden floors or concrete. Staining of the coat or colouring.


06-Dec-2011

FLOORCOAT NEW ZEALAND - Industrial Coatings

The right coating will have many benefits - increased light reflectivity, fast cure epoxy resins with no smell, increased safety, durability thermal shock, ability to with stand heat, chemicals and anti skid to name a few. Epoxy coatings or screeds for industrial use for factories, air craft hangers, cow sheds, dairy factories, garages etc.