Stepper Square High Torque

By: Anaheim Automation  06-Dec-2011
Keywords: Stepper Motors, Stepper Motor, Anaheim Automation

With Anaheim Automation's huge assortment of High-Torque Stepper Motors, a customer can select the most cost-effective solution, never sacrificing quality or system performance. The stepper motor product line ranges from the smallest NEMA 08Y series with up to 4.2 oz. inches of torque, to the largest NEMA 42K series with up to 5,700 oz. inches of torque. The stepper motor line includes Specialty-Type Stepper Motor, such as

and

packages, wherein the driver/controller circuitry is built into the stepper motor assembly (See

). Most high-Torque Stepper Motors have a 1.8-degree step angle as standard, yet other step angles are available. Four, six and eight-lead configurations are standard for Anaheim Automation's stepper motor product line, and are model dependent. Other options available are conduit boxes, special stepper motor windings, shaft modifications, as well as

,

,

,

, and

adders.

08Y

The 08Y High-Torque Stepper Motor series is offered in two stack versions, with torque peak torque from 2.5 to 4.2 ounce inches. These 1.8°, four-lead motors are available in single and double-ended shaft models.

11Y

The 11Y High-Torque Stepper Motor series is offered in three stack versions, with peak torque from 8.3 to 16.7 ounce inches. These 1.8°, four-lead motors are available in single and double-ended shaft models.

14Y

The 14Y High-Torque Stepper Motor series is offered in three stack versions, with peak torque from 9.0 to 19 ounce inches. These 1.8°, four-lead motors are available in single and double-ended shaft models.

15Y

The 15Y High-Torque Stepper Motor series is offered in four stack versions, with peak torque from 9.0 to 50 ounce inches. These 1.8°, four-lead motors are available in single and double-ended shaft models.

17Y

The 17Y High-Torque Stepper Motor series is offered in five stack versions, with peak torque from 24 to 100 ounce inches. These motors are 1.8° with four lead wires as standard, but are available in other step angles and wire configurations, as well as single and double-ended shaft models.

17Y9 (0.9° Step Angle)

The 17Y9 series offers smoother stepping that the 17Y Series due to the 0.9° step angle. Some people use this motor to run smoother without having to go to the higher driver expense for microstepping. The motor body is 1.7" (42mm) square and comes in 3 different stack lengths. This series offers torque up to 86 oz-in (4.4 Kg-cm). These motors can be ordered as four or six lead configurations.

17L

The 17L High-Torque Stepper Motor series is offered in three stack versions, with peak torque from 38 to 77 ounce inches. These motors are 1.8° or 0.9° with eight lead wires as standard, in both single and double-ended shaft models. Also available are IP65-rated motors (17L65 series).

17L9 (0.9° Step Angle)

The 17L9 series offers smoother stepping that the 17L Series due to the 0.9° step angle. The 17L9 High-Torque Stepper Motor series is offered in a two stack version, with bipolar holding torque 28 ounce inches. This motor is 0.9° with eight lead wires as standard, in both single and double-ended shaft models.

23Y

The 23Y High-Torque Stepper Motor series is offered in three stack versions, with peak torque from 76 to 320 ounce inches. These motors are 1.8° with eight lead wires as standard, but are available in other wire configurations, as well as single and double-ended shaft models.

23Y9 (0.9° Step Angle)

The 23Y9 High-Torque Stepper Motor series is offered in two stack versions, with peak torque from 180 to 270 ounce-inches. These motors are 0.9° with eight lead wires as standard, but are available in other wire configurations, as well as single and double-ended shaft models.

23L

The 23L High-Torque Stepper Motor series is offered in four stack versions, with peak torque from 55 to 320 ounce inches. These motors are 1.8° or 0.9° with eight lead wires as standard, in both single and double-ended shaft models. Also available are IP65-rated motors (23L65 series).

23L9 (0.9° Step Angle)

The 23L9 series offers smoother stepping that the 23L Series due to the 0.9° step angle. The 23L9 High-Torque Stepper Motor series is offered in four stack versions, with bipolar holding torque from 50 to 300 ounce inches. This motor is 0.9° with eight lead wires as standard, in both single and double-ended shaft models.

24Y

The 24Y High-Torque Stepper Motor series is offered in five stack versions, with peak torque rated from 150 to 475 ounce inches. These motors are 1.8° with eight lead wires as standard, but are available in other wire configurations, as well as single and double-ended shaft models.

34Y

The economical 34Y High-Torque Stepper Motor series is offered in four stack versions, with peak torque from 467 to 1,700 ounce inches. These motors are 1.8° with eight lead wires, single and double-ended shaft models as standard, but customization is available.

34N

The powerful 34N High-Torque Stepper Motor series is offered in four stack versions, with peak torque from 650 to 2,180 ounce inches. These motors are 1.8° with eight lead wires as standard, but are available in other wire configurations, conduit boxes, IP ratings, as well as single and double-ended shaft models. Compatible with Pacific Scientific N34 series.

34K

The 34K High-Torque Stepper Motor series is the most powerful in the NEMA 34 size. Offered in four stack versions, with peak torque from 830 to 2,790 ounce inches, these motors are 1.8° with eight lead wires as standard, but are available in other wire configurations, conduit boxes, IP ratings, as well as single and double-ended shaft models. Compatible with the Pacific Scientific K34 series.

34V

The 34V High-Torque Stepper Motor series is offered in three stack versions, with peak torque from 420 to 1301 ounce inches. These motors are 1.8° with eight lead wires as standard, and are available as single and double-ended shaft models. The 34V series is the closest match to the SloSyn KML and the Oriental NEMA 34 series.

42Y

The economical 42Y High-Torque Stepper Motor series is offered in four stack versions, with peak torque from 1,625 to 4,036 ounce inches. These motors are 1.8° with eight lead wires, single and double-ended shaft models as standard, but customization is available.

42N

The powerful 42N High-Torque Stepper Motor series is offered in four stack versions, with peak torque from 1,650 to 4,365 ounce inches. These motors are 1.8° with eight lead wires as standard, but are available in other wire configurations, conduit boxes, IP ratings, as well as single and double-ended shaft models. Compatible with the Pacific Scientific N42 series.

42K

The 42K High-Torque Stepper Motor series is the most powerful in the NEMA 42 size. Offered in three stack versions, with peak torque from 2,135 to 5,700 ounce inches, these motors are 1.8° with eight lead wires as standard, but are available in other wire configurations, conduit boxes, IP ratings, as well as single and double-ended shaft models. Compatible with the Pacific Scientific K42 series.

Keywords: Anaheim Automation, Lead Wires, Motor Product, Stepper Motor, Stepper Motors

Other products and services from Anaheim Automation

06-Dec-2011

Stepper Motors

For applications where the wiring from the stepper motors to the stepper drivers exceeds 25 feet, please contact the factory for instructions, as it is likely that transient voltage protection devices will be required. Protect drivers, controllers and stepper motors from environments that are corrosive, contain voltage spikes, or prevent good ventilation.


06-Dec-2011

Anaheim Automation DC Motor, and Planetary Gearbox Products

Up to Four Stack Lengths, Several Windings in Each Frame Size. Drop-In Replacement for Most Competitors, at Huge Savings. Sizes: NEMA 08, 11, 14, 15, 17, 23, 24, 34 and 42. Torque: 2.5 to 5,700 Ounce-Inches.


06-Dec-2011

Stepper Products

Users appreciate the ease-of-use of the matched components of the Stepper Motor Driver Packs and Integrated Motor/Driver/Controller units, while OEM customers appreciate the cost savings and flexibility of being able to purchase sub-assemblies, easily incorporating them into their own control panels or machinery.


06-Dec-2011

Stepper Standard Round Motor

Each standard stepper motor series has up to three stack lengths to cover a wide range of torque, ranging from 40 ounce-inches in the NEMA 23 series, to up to 1,575 ounce inches in the NEMA 42 stepper motor series. Standard Stepper Motors are also available with conduit boxes, special stepper motor windings and shaft modifications, as well as cable, connector, and encoder adders.


06-Dec-2011

Permanent Magnet (PM) Stepper Motors

Anaheim Automation's TSM Series is a broad line of Permanent Magnet DC Stepper Motors, available in many sizes ranging from 15mm to 57mm in diameter. These CE Certified motors come standard with 7.5 or 15° step angles, four or six-lead wire connection, offered in several current ratings. These miniature Permanent Magnet DC stepper motors measure 20mm in diameter and provide up to 1.111 ounce-inches of bipolar torque.


06-Dec-2011

IP65 Rated Sealed Stepper Motors

The IP65-Sealed Stepper Motor series is an excellent choice for lab automation, biotech, and semiconductor automation equipment, just to name a few. The economical 23Y65 Sealed Stepper Motor series is offered in three stack versions, with torque rated from 175 to 262 ounce inches. The 17L65 Sealed Stepper Motor series is offered in three stack versions, with torque rated from 38 to 83 ounce-inches.


06-Dec-2011

Stepper Gearmotors

Anaheim Automation's Permanent Magnet Stepper Motor with Integrated Gearboxes are PM Gearmotors that provide precise motion at a economical price. These gearmotors are offered in six sizes with torque ranges of 300 to 4,000 g-cm, or up to 1,250 ounce-inches. Customization is available to suit a customer's exact requirements.